Brooks,
I appreciate the quick follow up. You were right, and this now work
perfectly. Thank you for taking the time to respond to my question.
Thanks,
Paul
Brooks Davis wrote:
On Wed, Jul 22, 2009 at 02:05:43PM -0500, Paul A. Procacci wrote:
Gents,
Since the name changed for my cdce device, booting up the OS fails to
obtain an address via dhcp on this interface. dhclient works normally
after the machine is booted and I provide the command on the command line.
I've got the following in my rc.conf which I would have thought to be
enough, but it doesn't matter as dhclient never gets run,
ifconfig_ue0="DHCP"
This isn't a deal breaker by any means, but would like to inquire about
about the proper steps for getting dhclient to physically work on the ue0
interface. Docs on this subject (usb ethernet changes) at this point are
scarce and I'm not sure what specifically needs to be done.
This generally means that ue0 never reports a link up event which means
dhclient never gets run. If so, the driver is broken, but you may be
able to work around it by changing DHCP to SYNCDHCP. In that case
it may work if the cable is plugged in when the device it attached.
-- Brooks
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
