Milan Obuch writes:
On Wednesday 22 July 2009 08:11:23 Sagara Wijetunga wrote:
Milan Obuch writes:
> On Wednesday 22 July 2009 04:20:27 Sagara Wijetunga wrote:
>> Hi FreeBSD community
>>
>> The SCSI device (eg. da1s1) is not created automatically upon a CF card
>> plug in on an USB multi-card reader on FreeBSD 7.2 (i386) but the SCSI
>> device (eg. da1s1) is created automatically if I reboot the computer
>> while the CF card is plug in.
>>
Which kind of reader is it?Is it something built-in or standalone connected
via USB cable to (externally accessible) USB port on your computer? If the
latter, could you try the difference between plugging first reader into USB
port, than CF into reader and plugging first CF into reader and than connect
reader into USB port?
1. This is an internal multi-card reader.
2. The CF card is not malformed. I have tried with a brand new CF card,
FreeBSD does not create a daXs1 slice device node even for the new CF card.
3. Tried both cards under Linux 2.6, they work fine. No issue at all. The
moment the card is plug in, Linux creates the sdc1 device node, the moment
the CF card is taken out of the reader, the Linux removes the sdc1 node.
4. Both cards factory formatted to msdos file system.
Regards
Sagara
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
