Sagara Wijetunga writes:
Hi FreeBSD community
After an USB thumb drive id pluged in, the devd prints following line:
+umass0 vendor=0x0781 product=0x5406 devclass=0x00 devsubclass=0x00
release=0x0200 sernum="087663165D8139E6" intclass=0x08 intsubclass=0x06 at
port=0 interface=0 vendor=0x0781 product=0x5406 devclass=0x00
devsubclass=0x00 release=0x0200 sernum="087663165D8139E6" intclass=0x08
intsubclass=0x06 on uhub4
1. Could I know which exact program print above line on /dev/devctl ?
2. I want to print another line with "daN" as the device-name, where N is
0 to 9, with minimum vendor and product ids once the allocated device-name
is known for USB Mass Storage devices. Your additional ideas/feedback/help
is most welcomed.
There is a typing mistake: "After an USB thumb drive id pluged in" should be
corrected as "After an USB thumb drive is plugged in". Very sorry for the
mistake.
Btw, I have started looking at umass.c and will have a look at later at
usb.c of /usr/src/sys/dev/usb/.
Any help is still very much appreciated.
Best regards
Sagara
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
