on 23/05/2009 05:26 Alexander Motin said the following:
Hi.
Joe Karthauser wrote:
I spoke too soon. It must have just randomly booted, because it is now
hanging again. No amount of jiggling cables has made any difference.
Can you provide verbose boot messages of your system from the beginning
up to the problem? Especially, all related to the ATA.
Attached.
>
Do you have AHCI mode enabled in BIOS, or you using legacy ATA emulation?
It's set up as AHCI in the bios.
What is strange is that it has now started working again. I can't make
any sense of it. The machine boots up fine. It was definitely hanging
at the ata probes though, just after the ZFS messages are output.
Joe
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #7: Fri May 22 23:10:15 BST 2009
r...@athenaeum.tao.org.uk:/usr/obj/usr/src/sys/ATHENAEUM
Preloaded elf kernel "/boot/kernel/kernel" at 0x80b47000.
Preloaded elf module "/boot/kernel/zfs.ko" at 0x80b4719c.
Preloaded elf module "/boot/kernel/opensolaris.ko" at 0x80b47244.
Preloaded elf module "/boot/kernel/geom_eli.ko" at 0x80b472f4.
Preloaded elf module "/boot/kernel/crypto.ko" at 0x80b473a4.
Preloaded elf module "/boot/kernel/zlib.ko" at 0x80b47450.
Preloaded elf module "/boot/kernel/geom_label.ko" at 0x80b474fc.
Preloaded elf module "/boot/kernel/geom_mirror.ko" at 0x80b475ac.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0x80b4765c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0x80b476b4.
module_register: module g_label already exists!
Module g_label failed to register: 17
Calibrating clock(s) ... i8254 clock: 1192003 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2402413236 Hz
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2402.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory = 3756916736 (3582 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x00000000dbf7ffff, 3677728768 bytes (897883 pages)
avail memory = 3673681920 (3503 MB)
Table 'FACP' at 0xdfee30c0
Table 'HPET' at 0xdfee7e00
Table 'MCFG' at 0xdfee7e80
Table 'APIC' at 0xdfee7d00
MADT: Found table at 0xdfee7d00
MP Configuration Table version 1.4 found at 0x800f0d00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 1: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <GBT GBTUACPI>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
bios32: Found BIOS32 Service Directory header at 0x800fad30
bios32: Entry = 0xfb3f0 (800fb3f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb420
pnpbios: Found PnP BIOS data at 0x800fbf90
pnpbios: Entry = f0000:bfc0 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ULE: setup cpu group 2
ULE: setup cpu 2
ULE: adding cpu 2 to group 2: cpus 1 mask 0x4
ULE: setup cpu group 3
ULE: setup cpu 3
ULE: adding cpu 3 to group 3: cpus 1 mask 0x8
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
ACPI: RSDP @ 0x0xf6c30/0x0014 (v 0 GBT )
ACPI: RSDT @ 0x0xdfee3040/0x0034 (v 1 GBT GBTUACPI 0x42302E31 GBTU
0x01010101)
ACPI: FACP @ 0x0xdfee30c0/0x0074 (v 1 GBT GBTUACPI 0x42302E31 GBTU
0x01010101)
ACPI: DSDT @ 0x0xdfee3180/0x4B32 (v 1 GBT GBTUACPI 0x00001000 MSFT
0x0100000C)
ACPI: FACS @ 0x0xdfee0000/0x0040
ACPI: HPET @ 0x0xdfee7e00/0x0038 (v 1 GBT GBTUACPI 0x42302E31 GBTU
0x00000098)
ACPI: MCFG @ 0x0xdfee7e80/0x003C (v 1 GBT GBTUACPI 0x42302E31 GBTU
0x01010101)
ACPI: APIC @ 0x0xdfee7d00/0x0084 (v 1 GBT GBTUACPI 0x42302E31 GBTU
0x01010101)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
nfslock: pseudo-device
mem: <memory>
Pentium Pro MTRR support enabled
crypto: <crypto core>
null: <null device, zero device>
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
random: <entropy source, Software, Yarrow>
npx0: INT 16 interface
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
acpi0: <GBT GBTUACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0x86862000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29c08086)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dfde0000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 12 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 14 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x29c0, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x29c1, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2937, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xe000, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[20]: type I/O Port, range 32, base 0xe100, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2939, revid=0x02
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xe500, size 5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293c, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfb105000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293e, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=14
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfb100000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2946, revid=0x02
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2948, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2934, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0xe200, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0xe300, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type I/O Port, range 32, base 0xe400, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293a, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfb104000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x92
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2918, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2923, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0xe600, size 3, enabled
map[14]: type I/O Port, range 32, base 0xe700, size 2, enabled
map[18]: type I/O Port, range 32, base 0xe800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xe900, size 2, enabled
map[20]: type I/O Port, range 32, base 0xea00, size 5, enabled
map[24]: type Memory, range 32, base 0xfb106000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[10]: type Memory, range 64, base 0xfb107000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x500, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xf4000000-0xf6ffffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0392, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xf4000000, size 24, enabled
pcib1: requested memory range 0xf4000000-0xf4ffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28,
enabled
pcib1: requested memory range 0xe0000000-0xefffffff: good
map[1c]: type Memory, range 64, base 0xf5000000, size 24, enabled
pcib1: requested memory range 0xf5000000-0xf5ffffff: good
map[24]: type I/O Port, range 32, base 0xa000, size 7, enabled
pcib1: requested I/O range 0xa000-0xa07f: in range
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> port 0xa000-0xa07f mem
0xf4000000-0xf4ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff irq 16 at
device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe100-0xe11f irq 21 at device 26.1
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe100
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xe500-0xe51f irq 18 at device 26.2
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe500
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb105000-0xfb1053ff irq 18 at
device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfb105000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x9000-0x9fff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xb000-0xbfff
pcib3: memory decode 0xfb000000-0xfb0fffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x197b, dev=0x2363, revid=0x02
domain=0, bus=3, slot=0, func=0
class=01-06-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[24]: type Memory, range 32, base 0xfb000000, size 13, enabled
pcib3: requested memory range 0xfb000000-0xfb001fff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 19
found-> vendor=0x197b, dev=0x2363, revid=0x02
domain=0, bus=3, slot=0, func=1
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xb000, size 3, enabled
pcib3: requested I/O range 0xb000-0xb007: in range
map[14]: type I/O Port, range 32, base 0xb100, size 2, enabled
pcib3: requested I/O range 0xb100-0xb103: in range
map[18]: type I/O Port, range 32, base 0xb200, size 3, enabled
pcib3: requested I/O range 0xb200-0xb207: in range
map[1c]: type I/O Port, range 32, base 0xb300, size 2, enabled
pcib3: requested I/O range 0xb300-0xb303: in range
map[20]: type I/O Port, range 32, base 0xb400, size 4, enabled
pcib3: requested I/O range 0xb400-0xb40f: in range
pcib3: matched entry for 3.0.INTB
pcib3: slot 0 INTB hardwired to IRQ 16
atapci0: <JMicron JMB363 SATA300 controller> mem 0xfb000000-0xfb001fff irq 19
at device 0.0 on pci3
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfb000000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci1: <JMicron JMB363 UDMA133 controller> port
0xb000-0xb007,0xb100-0xb103,0xb200-0xb207,0xb300-0xb303,0xb400-0xb40f irq 16 at
device 0.1 on pci3
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb100
ata4: reset tp1 mask=03 ostat0=00 ostat1=00
ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata4: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata4: [MPSAFE]
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xf7000000-0xf8ffffff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x10ec, dev=0x8168, revid=0x01
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xc000, size 8, enabled
pcib4: requested I/O range 0xc000-0xc0ff: in range
map[18]: type Memory, range 64, base 0xf8000000, size 12, enabled
pcib4: requested memory range 0xf8000000-0xf8000fff: good
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 16
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit
Ethernet> port 0xc000-0xc0ff mem 0xf8000000-0xf8000fff irq 16 at device 0.0 on
pci4
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xf8000000
re0: MSI count : 2
re0: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 256 to vector 54
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:1a:4d:4a:1d:b1
re0: [MPSAFE]
re0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xe200-0xe21f irq 23 at device 29.0
on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe200
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xe300-0xe31f irq 19 at device 29.1
on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe300
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xe400-0xe41f irq 18 at device 29.2
on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb104000-0xfb1043ff irq 23 at
device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfb104000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xd000-0xdfff
pcib5: memory decode 0xf9000000-0xfaffffff
pcib5: no prefetched decode
pcib5: Subtractively decoded bridge.
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x1186, dev=0x4300, revid=0x10
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled
pcib5: requested I/O range 0xd000-0xd0ff: in range
map[14]: type Memory, range 32, base 0xfa000000, size 8, enabled
pcib5: requested memory range 0xfa000000-0xfa0000ff: good
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 20
found-> vendor=0x1186, dev=0x4300, revid=0x10
domain=0, bus=5, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xd100, size 8, enabled
pcib5: requested I/O range 0xd100-0xd1ff: in range
map[14]: type Memory, range 32, base 0xfa001000, size 8, enabled
pcib5: requested memory range 0xfa001000-0xfa0010ff: good
pcib5: matched entry for 5.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 19
found-> vendor=0x9004, dev=0x6178, revid=0x01
domain=0, bus=5, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=15
map[10]: type I/O Port, range 32, base 0xd200, size 8, enabled
pcib5: requested I/O range 0xd200-0xd2ff: in range
map[14]: type Memory, range 32, base 0xfa002000, size 12, enabled
pcib5: requested memory range 0xfa002000-0xfa002fff: good
pcib5: matched entry for 5.2.INTA
pcib5: slot 2 INTA hardwired to IRQ 18
re1: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xd000-0xd0ff mem
0xfa000000-0xfa0000ff irq 20 at device 0.0 on pci5
re1: Reserved 0x100 bytes for rid 0x14 type 3 at 0xfa000000
re1: Chip rev. 0x10000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re1: bpf attached
re1: Ethernet address: 00:1c:f0:6e:c7:d2
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 55
re1: [MPSAFE]
re1: [FILTER]
re2: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xd100-0xd1ff mem
0xfa001000-0xfa0010ff irq 19 at device 1.0 on pci5
re2: Reserved 0x100 bytes for rid 0x14 type 3 at 0xfa001000
re2: Chip rev. 0x10000000
re2: MAC rev. 0x00000000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus2
rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re2: bpf attached
re2: Ethernet address: 00:1c:f0:ba:be:ed
re2: [MPSAFE]
re2: [FILTER]
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xd200-0xd2ff mem
0xfa002000-0xfa002fff irq 18 at device 2.0 on pci5
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 460 instructions downloaded
ahc0: Features 0x10101, Bugs 0x35, Flags 0x20481540
ahc0: [MPSAFE]
ahc0: [ITHREAD]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH9 SATA300 controller> port
0xe600-0xe607,0xe700-0xe703,0xe800-0xe807,0xe900-0xe903,0xea00-0xea1f mem
0xfb106000-0xfb1067ff irq 19 at device 31.2 on pci0
atapci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xea00
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfb106000
atapci2: AHCI called from vendor specific driver
atapci2: AHCI Version 01.20 controller with 4 ports detected
ata5: <ATA channel 0> on atapci2
ata5: SATA connect time=0ms
ata5: SIGNATURE: 00000101
ata5: ahci_reset devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: SATA connect time=0ms
ata6: SIGNATURE: 00000101
ata6: ahci_reset devices=0x1<ATA_MASTER>
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci2
ata7: port not implemented
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci2
ata8: port not implemented
ata8: [MPSAFE]
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci2
ata9: SATA connect time=0ms
ata9: SIGNATURE: 00000101
ata9: ahci_reset devices=0x1<ATA_MASTER>
ata9: [MPSAFE]
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci2
ata10: SATA connect time=0ms
ata10: SIGNATURE: 00000101
ata10: ahci_reset devices=0x1<ATA_MASTER>
ata10: [MPSAFE]
ata10: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56
fdc0: [FILTER]
sio0: irq maps: 0xdc29 0xdc39 0xdc29 0xdc29
sio0: irq maps: 0xdc29 0xdc39 0xdc29 0xdc29
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: enabling SpeedStep
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 920092006000620
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 920092006000620
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 920092006000620
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 920092006000620
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xd0000-0xd1fff,0xd2000-0xd4fff,0xd5000-0xd57ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 59
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 60
ata1: [MPSAFE]
ata1: [ITHREAD]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 61
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xdc29 0xdc29 0xdc29 0xdc29
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 230866 -> 100000
procfs registered
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
lapic: Divisor 2, Frequency 133467407 hz
Timecounter "TSC" frequency 2402413236 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
The GEOM class LABEL is already loaded.
ZFS filesystem version 13
ZFS storage pool version 13
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 476938MB <WDC WD5001ABYS-01YNA0 59.01D01> at ata2-master SATA300
ad4: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: <HL-DT-STDVD-RAM GSA-H55N/1.02> DVDR drive at ata4 as master
acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 476938MB <WDC WD5001ABYS-01YNA0 59.01D01> at ata5-master SATA300
ad10: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad12: 476938MB <WDC WD5001ABYS-01YNA0 59.01D01> at ata6-master SATA300
ad12: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue
ata9-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad18: 476938MB <WDC WD5001ABYS-01YNA0 59.01D01> at ata9-master SATA300
ad18: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue
ata10-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad20: 476938MB <WDC WD5001ABYS-01YNA0 59.01D01> at ata10-master SATA300
ad20: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM_LABEL: Label for provider ad4 is label/sata5.
GEOM: new disk ad10
GEOM: new disk ad12
GEOM: new disk ad18
GEOM: new disk ad20
GEOM_LABEL: Label for provider ad4s1a is ufsid/477454d17d3bf4f7.
GEOM_LABEL: Label for provider ad4s1c is ufsid/4774549e7d9d0f30.
GEOM_LABEL: Label for provider ad10 is label/sata1.
GEOM_LABEL: Label for provider ad12 is label/sata2.
GEOM_LABEL: Label for provider ad18 is label/sata3.
GEOM_LABEL: Label for provider ad20 is label/sata4.
GEOM_LABEL: Label ufsid/4774549e7d9d0f30 removed.
GEOM_LABEL: Label ufsid/477454d17d3bf4f7 removed.
GEOM_MIRROR: Device mirror/boot0 launched (5/5).
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 2
ioapic0: Assigning ISA IRQ 7 to local APIC 3
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 2
ioapic0: Assigning PCI IRQ 16 to local APIC 3
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 2
ioapic0: Assigning PCI IRQ 21 to local APIC 3
ioapic0: Assigning PCI IRQ 23 to local APIC 0
msi: Assigning MSI IRQ 256 to local APIC 1
Trying to mount root from zfs:storage/rootfs
start_init: trying /sbin/init
GEOM_LABEL: Label for provider mirror/boot0 is ufsid/4774549e7d9d0f30.
GEOM_LABEL: Label for provider mirror/boot0a is ufsid/477454d17d3bf4f7.
GEOM_LABEL: Label ufsid/4774549e7d9d0f30 removed.
GEOM_LABEL: Label ufsid/477454d17d3bf4f7 removed.
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding
disabled, default to deny, logging disabled
re0: link state changed to UP
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
