On Wed, 22 Apr 2009, Marius Strobl wrote:
On Wed, Apr 22, 2009 at 11:06:12AM -0400, Jeff Blank wrote:
On Tue, Apr 21, 2009 at 09:55:10PM +0200, Marius Strobl wrote:
Use the sources you have but plug in sys/dev/bge/if_bge.c
rev 1.198.2.13 and sys/dev/pci/pci.c rev 1.355.2.6, this
combination should work.
correct.
Then update if_bge.c to rev
1.198.2.14 and check whether things still work,
this causes the problem to resurface.
David,
this is the second report that using MSI with a BCM5754/
chip=0x167a14e4 results in no interrupts, is there any
errata about this?
Thanks,
Marius
I wanted to upgrade my stable and but now am afraid to
reboot with the new kernel as I've got one of these bge0 cards.
dmesg reveals:
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
a different version of BCM, not BCM 5754
and the log of cvsup shows:
Edit src/sys/dev/bge/if_bge.c
Add delta 1.198.2.12 2009.01.15.20.13.22 marius
Add delta 1.198.2.13 2009.01.15.20.19.53 marius
Add delta 1.198.2.14 2009.01.15.20.23.38 marius
Add delta 1.198.2.15 2009.03.19.16.44.37 marius
Add delta 1.198.2.16 2009.03.23.20.53.38 marius
Add delta 1.198.2.17 2009.03.27.21.21.22 marius
Would you advise using the old kernel? Should I have
posted to -questions?
Annelise
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"