Some of this may be old news, but I just thought I'd report my experiences
upgrading my laptop to 4.0-stable yesterday.
#1. First, here's a new entry for pccard.conf:
# PreMax PE-200 Ethernet Card
card "PMX " "PE-200"
config auto "ed0" 11 0x10
ether 0x7f0
insert logger -t pccard:$device -s PREMAX PE-200 inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s PREMAX PE-200 removed
remove /sbin/ifconfig $device delete
#2. This card requires a 1024 memory block, but a bug in pccardd causes
the allocation to always fail...
Of course, now that the card works again I can see that this is
already fixed in -current, pccardd/util.c rev. 1.14.
Would someone care to MFC please?
#3. My USR modem card used to work with PAO. Now when I try to talk
to it (using 'tip') the laptop completely freezes.. such that
only a power cycle wakes it up. Here are the messages that appear:
pccardd[66]: Card "U.S. Robotics"("XJ/CC1336") matched "U.S. Robotics"
("XJ/CC1336")
pccardd[66]: Assign sio1, io 0x2f8-0x2ff, mem 0x0, 0 bytes, irq 3, flags 0
/kernel: sio1 at port 0x2f8-0x2ff irq 3 slot 1 on pccard1
/kernel: sio1: type 8250
pccard:sio1: U.S. Robotics XJ/CC1336 inserted
Thanks,
-Archie
___________________________________________________________________________
Archie Cobbs * Whistle Communications, Inc. * http://www.whistle.com
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
