Pyun YongHyeon wrote:
>
> I touched fxp(4) to add more hardware assistance so it could cause
> problems on your box. Please show me dmesg output and
> "ifconfig fxp0"
> output.
>
> If you doubt checksum offloading or TSO issues, try
> "ifconfig fxp0 -tso -txcsum -rxcsum".
>
As I remember this Dual card is out of a "Symantec/RaQ/Raptor/Firewall"
and has a 3DES CryptoChip onboard.
[r...@atom:~] # ifconfig fxp0
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:02:b3:b8:e5:7f
inet6 fe80::202:b3ff:feb8:e57f%fxp0 prefixlen 64 scopeid 0x3
media: Ethernet autoselect (none)
status: no carrier
[r...@atom:~] # ifconfig fxp1
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:02:b3:b8:e5:80
inet6 fe80::202:b3ff:feb8:e580%fxp1 prefixlen 64 scopeid 0x4
media: Ethernet autoselect (none)
status: no carrier
[r...@atom:~] # dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-STABLE #3: Thu Mar 5 17:03:54 CET 2009
r...@atom.beatsnet.com:/usr/obj/usr/src/sys/ATOM_amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2002.57-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
usable memory = 2137423872 (2038 MB)
avail memory = 2061045760 (1965 MB)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <network, ethernet> at device 10.0 (no driver attached)
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet>
port 0x8800-0x88ff mem 0xfb400000-0xfb4000ff irq 17 at device 12.0 on pci0
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:30:4f:60:3e:16
re0: [FILTER]
re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet>
port 0x9000-0x90ff mem 0xfb600000-0xfb6000ff irq 18 at device 13.0 on pci0
re1: Chip rev. 0x10000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re1: Ethernet address: 00:30:4f:60:3e:2b
re1: [FILTER]
pcib2: <PCI-PCI bridge> at device 14.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xe400-0xe43f mem
0xfbd00000-0xfbd00fff,0xfbc00000-0xfbc1ffff irq 19 at device 4.0 on pci2
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus2
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:b8:e5:7f
fxp0: [ITHREAD]
fxp1: <Intel 82550 Pro/100 Ethernet> port 0xe800-0xe83f mem
0xfbf00000-0xfbf00fff,0xfbe00000-0xfbe1ffff irq 16 at device 5.0 on pci2
miibus3: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus3
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:b3:b8:e5:80
fxp1: [ITHREAD]
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
