Hi,
tuning my network fixing nic's speed and duplex (both on server and
switch) i got this error with bce driver:
# ifconfig bce0
bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
ether 00:15:c5:fe:11:01
inet 192.168.1.13 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (1000baseSX <full-duplex>)
status: active
# ifconfig bce0 media 1000baseSX
ifconfig: SIOCSIFMEDIA (media): Device not configured
or (according to bce(4)):
# ifconfig bce0 media 1000baseTX
ifconfig: SIOCSIFMEDIA (media): Device not configured
system:
# uname -rsm
FreeBSD 7.1-RELEASE-p3 amd64
b...@pci0:6:0:0: class=0x020000 card=0x01bb1028 chip=0x16ac14e4
rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme II BCM5708S Gigabit Ethernet'
class = network
subclass = ethernet
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci6
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0: 1000baseSX-FDX, auto
bce0: Ethernet address: 00:15:c5:fe:0f:c6
bce0: [ITHREAD]
bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )
--
Cris, member of G.U.F.I
Italian FreeBSD User Group
http://www.gufi.org/
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
