On Wed, Feb 11, 2009 at 3:21 PM, pluknet <pluk...@gmail.com> wrote: > Hi. > > 2009/2/12 Greg Rivers > <gcr+freebsd-sta...@tharned.org<gcr%2bfreebsd-sta...@tharned.org> > >: > > I'm trying to light an Intel 10GbE adapter in an HP DL380 G5 using very > > recent 7.1-STABLE amd64 with GENERIC kernel. I expected the ixbg(4) > driver > > to attach, but it does not. > > > > The labels on the card show: > > INTEL(R) 10GbE XF SR 2 PORT SERVER ADAPTER > > 893135 > > EXPX9502FXSRGP5 > > > > 001B211170BE 028AD E15728-003 > > > > > > A verbose boot shows the card on the PCI bus, but no driver attaches: > > > > pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > > pcib11: domain 0 > > pcib11: secondary bus 23 > > pcib11: subordinate bus 23 > > pcib11: I/O decode 0x6000-0x6fff > > pcib11: memory decode 0xfde00000-0xfdffffff > > pcib11: no prefetched decode > > pci23: <ACPI PCI bus> on pcib11 > > pci23: domain=0, physical bus=23 > > found-> vendor=0x8086, dev=0x10c6, revid=0x01 > > domain=0, bus=23, slot=0, func=0 > > class=02-00-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=a, irq=10 > > powerspec 3 supports D0 D3 current D0 > > MSI supports 1 message, 64 bit > > MSI-X supports 18 messages in map 0x1c > > map[10]: type Memory, range 32, base 0xfdfe0000, size 17, enabled > > pcib11: requested memory range 0xfdfe0000-0xfdffffff: good > > map[14]: type Memory, range 32, base 0xfdf80000, size 18, enabled > > pcib11: requested memory range 0xfdf80000-0xfdfbffff: good > > map[18]: type I/O Port, range 32, base 0x6000, size 5, enabled > > pcib11: requested I/O range 0x6000-0x601f: in range > > map[1c]: type Memory, range 32, base 0xfdf70000, size 14, enabled > > pcib11: requested memory range 0xfdf70000-0xfdf73fff: good > > pcib11: matched entry for 23.0.INTA > > pcib11: slot 0 INTA hardwired to IRQ 19 > > found-> vendor=0x8086, dev=0x10c6, revid=0x01 > > domain=0, bus=23, slot=0, func=1 > > class=02-00-00, hdrtype=0x00, mfdev=1 > > cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords) > > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > > intpin=b, irq=5 > > powerspec 3 supports D0 D3 current D0 > > MSI supports 1 message, 64 bit > > MSI-X supports 18 messages in map 0x1c > > map[10]: type Memory, range 32, base 0xfdf40000, size 17, enabled > > pcib11: requested memory range 0xfdf40000-0xfdf5ffff: good > > map[14]: type Memory, range 32, base 0xfdf00000, size 18, enabled > > pcib11: requested memory range 0xfdf00000-0xfdf3ffff: good > > map[18]: type I/O Port, range 32, base 0x6020, size 5, enabled > > pcib11: requested I/O range 0x6020-0x603f: in range > > map[1c]: type Memory, range 32, base 0xfdef0000, size 14, enabled > > pcib11: requested memory range 0xfdef0000-0xfdef3fff: good > > pcib11: matched entry for 23.0.INTB > > pcib11: slot 0 INTB hardwired to IRQ 16 > > pci23: <network, ethernet> at device 0.0 (no driver attached) > > pci23: <network, ethernet> at device 0.1 (no driver attached) > > > > > > pciconf shows: > > > > no...@pci0:23:0:0: class=0x020000 card=0xa15f8086 chip=0x10c68086 > > rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > class = network > > subclass = ethernet > > no...@pci0:23:0:1: class=0x020000 card=0xa15f8086 chip=0x10c68086 > > rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > class = network > > subclass = ethernet > > You probably want to load ixgbe(4), not ixgb(4) (latter is afaik an > older PCI-X version driver). > The labels on the card are close to the description of ixgbe. > Note, it's not in GENERIC. >
Yes, its an Oplin, 82598, it uses my ixgbe driver rather than ixgb. Cheers, Jack _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
