Hello Patrick, and thank you for your reply.
Quoting Patrick Mahan <ma...@mahan.org>:
Chris H presented these words - circa 1/30/09 7:03 AM->
Hello Bruce, and thank you for your reply.
Quoting "Bruce M. Simpson" <b...@freebsd.org>:
Chris H wrote:
...
I know Peter Grehan was looking at getting FreeBSD onto the Cisco
827 a while back.
That's good news. I'll have to see if I can get more info on that.
I just purchased a "lot" of cisco *DSL/routers on ebay, in an effort
to push this project forward (I can experiment on these with less
concern).
IMHO pfSense beats the pants off OpenWRT from a user/deployment
point of view, and often that is ultimately what counts.
I guess I'd have to agree, except if it weren't for the fact I always
have a zillion things going simultaneously, I wouldn't even know what
X was - I can't get enough VC's (virtual consoles), so I'm forced to
use X. But, of course for most "end users" /convenience/ is everything,
and most don't want to any more that how to turn it on. :)
Thing is, it's "only" for x86-based PCs. I had the foresight to
purchase some relatively quiet 1U boxes, but they're still too
noisy to have in a room where people sleep live or socialise --
they belong to the computer nook at the front of the apartment (I
have a very odd C-shaped apartment).
Yes, the (older) cisco's CPU's were MIPS - aka - Motorola, and ran AUX.
I've got the latest version of AUX, which is a newer version than they
ran. In fact, it wouldn't be a bit surprised if I could load AIX on it.
Yes, most of the core CPU's used by Cisco were MIPS, however, they were
not made by Motorola
Please take no offense. But as I look inside, the CPU does, in fact
say Motorola. The documentation for it also confirms that most of
(if not all) of the 800 series also used the Motorola RISC.
and didn't run AUX (if by AUX you mean Apples Unix
OS).
I probably stand corrected on this. :)
But I'll bet - given the CPU, it wouldn't be much of a streatch to
run either AUX, or AIX on it.
Thanks again for your response.
--Chris
Instead they ran Cisco's own IOS kernel/software.
Patrick Mahan
I believe something that could really make pfSense fly, would be
a viable port to mass-market, low-power consumer hardware. Then
again, old Ciscos "sort of" fit the bill.
Funny you bring that up. I was thinking the very same. As a matter of
fact I have been contemplating whipping something up myself, and doing
just that. While psSense initially seems appealing. The more I look into
it, the more I find it's laking - where a simple roll-out is concerned.
There isn't anything in the way of documentation. What's there is /horribly/
unorganized. It's scattered all over the place. What's more, the front
page of the wiki suggests that reading the m0n0wall documentation would
probabl;y be a better choice. Make no mistake, I know how daunting and
hectic an opensource project can be, and am grateful to /anyone/ whom is
willing to share the fruits of their labor at no cost. But I think I
could do better, that's all.
Repurposing old vendor hardware is just as subject to
engineering process as anything else, in some cases, the varying
Bill-of-Materials may make the economic cost too high to do things
on a mass scale.
I think I have a solution for that. I'll elaborate further when I can
confirm that.
If people would be reasonably expected to use such a system,
they should not have to understand the mechanisms, in great detail,
of how firmware is loaded onto a device. This is one of the main
stumbling blocks behind mass uptake -- we can't just say "fire up
this tool and click this 1 button" to extend/build new network
infrastructure.
Given the current economic and ecological situation, though,
devising systems which allow people to do this might be something
worth investigating, and funding to that effect may be available
"out there".
I /quite/ agree, and intend to persue just that. I've already
commissioned the artwork - and it looks GREAT. :)
I'll elaborate further as things firm up.
Thanks again Bruce, for taking the time to respond.
--Chris
cheers
BMS
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
