Hi, The speed is 9600. Actually I already tried with 7.1-RELEASE, with same results. I'll try the device.hints-changes, thanks.
-Timo -----Original Message----- From: Mike Tancsa [mailto:m...@sentex.net] Sent: 29. tammikuuta 2009 22:34 To: Timo Rikkonen; freebsd-stable@freebsd.org Subject: Re: /dev/cuau* ports hang after a while At 08:00 AM 1/26/2009, Timo Rikkonen wrote: >Hi, > >We are using "VScom PCI-200L" and "Moxa Technologies, C168H/PCI" >-cards for serial ports. After installing 7.0 the ports or the >connection to the port hang after a while. A "while" could be >half-a-day or 10 minutes. >There is no error message to be seen anywhere. > >Not all ports hang at the same time, it could be just one or two of >them. Earlier versions (6.2-RELEASE) work just fine. >The ports have different devicenames after 7.0, in 6.2 they were >/dev/cuad4-7, now they are /dev/cuau0-3 (uart?) Is the application fairly low speed (e.g. 9600bps or slower) ? If so, try with 7.1R, not 7 and add hint.uart.0.flags="0x100" hint.uart.1.flags="0x100" to /boot/device.hints http://www.freebsd.org/cgi/query-pr.cgi?pr=121421 has details ---Mike _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
