I might have a fix for this, let me check and get back to you.
Scott
Sent from my iPhone
On Jan 22, 2009, at 12:49 PM, Steve Polyack <kor...@comcast.net> wrote:
We have multiple systems using LSILogic PERC4 cards (PERC4e/Si,
PERC4/DC, amr driver). After recently upgrading two of them from
6.3 to 7.1, we have begun to see the following errors in our logs
during heavy use in both systems:
amr0: Too many retries on command 0xffffffff80a4da58. Controller is
likely dead
amr0: Too many retries on command 0xffffffff80a4eaa8. Controller is
likely dead
amr0: Too many retries on command 0xffffffff80a497a0. Controller is
likely dead
amr0: Too many retries on command 0xffffffff80a4eaa8. Controller is
likely dead
However, the system continues working and the volumes remain
accessible. This happens on the PERC4/DC controllers in both
systems. Firmware version is 352D. MegaCLI reports no problems.
Has anyone else seen these messages? A google search turns up
nothing but results in the driver code. Is this something we should
be worried about? We won't be moving any other systems to 7.1 until
we can clear this up.
Thanks!
-Steve Polyack
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
