On Tue, Jan 20, 2009 at 08:25:23PM +0100, Ralf van der Enden wrote: > Hi, > > I've recently upgraded my box from FreeBSD 7.0-RELEASE to 7.1-RELEASE. > > Now, whenever I reboot my machine it hangs during the boot proces. > > I have a Fasttrak TX2 100 card in my system which is used for booting FreeBSD > and it shows fine while it's searching for attached drives, but after it > loads the MBR the system shows the Fasttrak BIOS again and locks up > everything. The only way to resolve this is: > > 1) Turn off the system with the power button (reset button and > ctrl-alt-delete don't work) > 2) Turn it back on and go into the Fasttrak BIOS setup. (This is required, > because if I don't it'll get stuck like I explained above). > 3) Quit the Fasttrak BIOS and restart the system > 4) Everything loads fine now until I do another 'shutdown -r now' > > FreeBSD 7.0 never caused any trouble so I'm assuming this has to do with the > changes to the BTX bootloader. > > Does anyone know how to fix this ?
the easiest fix is to replace /boot/loader with the version from a 7.0 CD In the meantime (i am collecting data) can you tell us whether this uses an Intel or AMD CPU, sine or multi core ? cheers luigi _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
