On Wed, Dec 10, 2008 at 03:01:30PM +0100, Victor Balada Diaz wrote:
> On Wed, Dec 10, 2008 at 12:08:40PM +0000, Oliver Peter wrote:
> > On Tue, Dec 09, 2008 at 07:52:37PM +0100, Victor Balada Diaz wrote:
...
> I can use GENERIC kernel again (ie, USB enabled) and so far
> i didn't find any problem yet. No more interface up/down problems
> and no more interrupt storms. I must say that i haven't tested
> this enough, because the interrupt storms in ATA code start to
> happen after a few days of uptime load, but at least the problems
> with the realtek seem to be gone.
I found out that I'm able to 'force' the interrupt storm by provoking
higher disk I/O. Just let dd write to a file in a loop for some hours
and watch vmstat:
while true; do dd if=/dev/zero of=BLA bs=1M count=1000; done
First you'll see that the throughput will decrease, and a few
hours later you'll have /var/log/messages / dmesg full of
interrupt storm messages.
> If you upgrade to 7.1 -BETA2 you'll also get SATA support for
> the IXP card. With 7.0 it will work as ATA 33 in compatibility mode.
Wow! That's good to hear as well. I'll definitely switch to
-STABLE or 7.1-PRERELASE sooner or later. I'll just give it a try
on my other machines at first.
> I hope this helps you.
Absolutely, cheers mate. I owe you one!
~ollie
--
Oliver PETER, email: [EMAIL PROTECTED], ICQ# 113969174
"If it feels good, you're doing something wrong."
-- Coach McTavish
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
