Hello,
yesterday I buy new motherboard INTEL DP43TF and now I can't write dvd
disks in any format (on PATA dvd-drive). but still can read any dvd and
cd. cd write and blank procedure for dvd-rw done well too. when I start
write dvd by growisofs (/dev/cd0 - atapicam), in log I get:
Nov 14 08:28:06 <kern.crit> gx kernel: acd0: FAILURE - RESERVE_TRACK
ILLEGAL REQUEST asc=0x30 ascq=0x05
Nov 14 08:28:06 <kern.crit> gx kernel: interrupt storm detected on
"irq4:"; throttling interrupt source
Nov 14 08:28:50 <kern.crit> gx last message repeated <many> times
Nov 14 08:31:07 <kern.crit> gx kernel: acd0: FAILURE - WRITE_BIG timed out
if I use burncd (/dev/acd0. with, or without atapicam in kernel), then I
get only second string in log.
before upgrade, I had 6.3-RELEASE-p3, update to 7.0-RELEASE-p5, and
after to 7.1-PRELEASE #5, it doesn't change anything. drive
configuration in BIOS - too (change only SATA controller ICH10/AHCI).
this IRQ is also used by USB and COM. turning off both in BIOS and/or
kernel change IRQ map, but drive still not work correctly. present or
not ACPI module - doesn't matter too. by the way, COM port I also can't
reach (/dev/cuad0), but without interrupt storm in log's (through APCI
or ISA. even if USB and atapicd is turned off).
someone had the same problem?... thanks for attention :)
system info:
FreeBSD gx.dnepr.net 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #3: Thu Nov
13 16:23:09 EET 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KERN i386
pcib3: <ACPI PCI-PCI bridge> irq 4 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB368 UDMA133 controller> port
0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f
irq 4 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 4 at
device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
acd0: DVDR <NEC DVD RW ND-3550A/1.05> at ata2-<master or slave> UDMA33
cd0 at ata2 bus 0 target 1 lun 0
cd0: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(if media present in boot time - interrupt storm again)
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
