On Wed, May 15, 2019 at 09:33:50AM -0500, Kyle Evans wrote: > On Wed, May 15, 2019 at 8:33 AM mike tancsa <m...@sentex.net> wrote: > > > > On 5/15/2019 8:18 AM, Wall, Stephen wrote: > > >> New CPU microcode may be available in a BIOS update from your system > > >> vendor, > > >> or by installing the devcpu-data package or sysutils/devcpu-data port. > > >> Ensure that the BIOS update or devcpu-data package is dated after > > >> 2014-05-14. > > >> > > >> If using the package or port the microcode update can be applied at boot > > >> time > > >> by adding the following lines to the system's /boot/loader.conf: > > >> > > >> cpu_microcode_load="YES" > > >> cpu_microcode_name="/boot/firmware/intel-ucode.bin" > > > Is this applicable in a virtualized environment, or only on bare metal? > > > If not applicable in a VM, is it at least harmless? > > > > > > Actually, just tried this on RELENG_11 (r347613) and I get > > > > don't know how to load module '/boot/firmware/intel-ucode.bin' > > > > In boot/loader.conf I have > > > > cpu_microcode_load="YES" > > cpu_microcode_name="/boot/firmware/intel-ucode.bin" > > > > # ls -l /boot/firmware/intel-ucode.bin > > -rw-r--r-- 1 root wheel uarch 2571264 May 15 08:47 > > /boot/firmware/intel-ucode.bin > > > > # sha256 /boot/firmware/intel-ucode.bin > > SHA256 (/boot/firmware/intel-ucode.bin) = > > 1fdb3a25467d285394eded8039ee8ab488f074903654981d35a4cdfe6ebf12fc > > > > r337715 + r337716 were responsible for making this work, and they've > not yet been MFC'd as far as I can tell. CC markj@, because that's > probably good to sneak in soon.
I'm working on this. In any case, 11.2 doesn't have and won't get boot-time microcode update support, so an updated SA with instructions for 11 will be released shortly. _______________________________________________ freebsd-security@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-security To unsubscribe, send any mail to "freebsd-security-unsubscr...@freebsd.org"
