On Thu, 17 Mar 2005 22:43:15 -0500, John A. <[EMAIL PROTECTED]> wrote: > No problem with the english, if you didn't mention it, I wouldn't have known. > > I can ping FBSD from M$, can't ping anything from FBSD. > > M$ box works when plugged into hub and directly into radio. > > All systems are on same subnet.
If the other machines you are trying to ping have M$ firewall enabled, then you need to enable incoming echo request in the M$ firewall ICMP page. > > FBSD box worked when plugged into a 100mb hub, but doesn't work when > plugged into 10mb hub or directly into radio. Both hubs are 3Com and > are working with other systems plugged into them. > Try to check the output of "ifconfig" on the FreeBSD box when you connect it to the 100m hub / 10m hub / radio. Also try "route get <M$ BOX IP>" on the FreeBSD box and check the output. Does it provide the correct interface/gateway? > FBSD has no firwall configured. All I did was perform a standard > installation loading all binaries and sources from ftp. > > I just tested another FBSD 5.3 box that I have and it does the same > thing, works fine at 100mb, but appears to get lost at 10mb. > > Hope this answers some of your questions. > > John A. Am I the only one interested in this topic? Where is the rest of our lovely community? Come on guys let's scratch those gray cells and help John out. -- Kind regards Abu Khaled _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
