Chuck Robey wrote:
Chuck,I then edit the pointer section of /etc/X11/xorg.conf to:
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/bpsm0"
I am running FreeBSD-6.0-current, but I bet it works for you like it works (just fine) for me. Try it, what have you got to lose? However, if it works, you owe us a usage report, Sirrah!
Anyhow, FreeBSD is not terribly willing to share the mouse. When it boots, the stupid thing will start 'moused' processes on both mouses. Check this with:
ps -ax | grep mouse
if it's like I think it is, one of the lines that come back will report a device filename of ums0. You need this process dead, dead, dead. You *could*, I suppose, edit /etc/usbd.conf ...
After you do that, the stuff you have above for Xorg isn't enough either, cause you left out the wheel. take those lines out and replace them with
Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/ums0" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection
Don't forget, at the top:
Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection
Try this, tell me how it works.
Setting my mouse driver to "ums0", will make X crash before loading. My box never reported the ums0 device/the usb mouse. The usbd is running. There is no moused processes running on this box, as it is disabled in /etc/rc.conf. I get the scroll wheel to work as a middle button, but you are right, the scroll feature does not work.
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"Setting those two options does not enable the scroll wheel. I think that is due to the generic PS/2 driver reported in dmesg. Having a working scroll wheel was never a issue for me :) Also note, I never tried FreeBSD 6.x .
I am not sure if the following info matters or not:
This is included as it may give you some hints for fixing the wheel feature. This mouse config was a combination of some google hints that led me to look at, 'man psm', 'man device.hints', and my experience with Freebsd 4.x. FreeBSD 4.x taught me that using /dev/bpsm0 in the X config would work, with this mouse and this kvm. I didn't try setting up the moused in /etc/rc.conf with FreeBSD 5.x. In FreeBSD 4.x adding the bpsm0 config to /etc/rc.conf just lead to error messages getting reported to my shells every so often.
Here is some additional info:
%ls /dev acd0 ata fido psm0 ttyv3 acpi atkbd0 geom.ctl ptyp0 ttyv4 ad0 audio0.0 io ptyp1 ttyv5 ad0s1 audio0.1 kbd0 ptyp2 ttyv6 ad0s10 bpf0 klog ptyp3 ttyv7 ad0s1a bpsm0 kmem random ttyv8 ad0s1b console log sndstat ttyv9 ad0s1c consolectl lpt0 stderr ttyva ad0s1d ctty lpt0.ctl stdin ttyvb ad0s1e cuaa0 mdctl stdout ttyvc ad0s1f cuaia0 mem sysmouse ttyvd ad0s2 cuala0 mixer0 ttyd0 ttyve ad0s3 devctl net ttyid0 ttyvf ad0s4 devstat net1 ttyld0 urandom ad0s5 dsp0.0 net2 ttyp0 usb ad0s6 dsp0.1 net3 ttyp1 usb0 ad0s7 dspW0.0 network ttyp2 usb1 ad0s8 dspW0.1 nfs4 ttyp3 usb2 ad0s9 dspr0.1 null ttyv0 xpt0 agpgart fd pci ttyv1 zero apm fd0 ppi0 ttyv2 %cat /etc/rc.conf
# -- sysinstall generated deltas -- # Mon Jan 3 05:51:08 2005 # Created: Mon Jan 3 05:51:08 2005 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. hostname="demon-spawn.bsdunix.us" ifconfig_rl0="DHCP" linux_enable="YES" usbd_enable="YES" moused_port="/dev/psm0" moused_type="auto" moused_enable="NO" % %ps auxw | grep usbd root 362 0.0 0.2 1240 780 ?? Ss 5:51AM 0:00.01 /usr/sbin/usbd eric 871 0.0 0.1 348 232 p3 R+ 7:38AM 0:00.00 grep usbd
%ps auxw | grep mouse
eric 1240 0.0 0.5 2276 1760 p1 RV 9:18AM 0:00.00 grep mouse (csh)
this seems like a waste of bandwidth but...
%dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Sun Mar 13 08:53:16 CST 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CUSTOM
ACPI APIC Table: <AMIINT INTEL845>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.80GHz (2790.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 394199040 (375 MB)
avail memory = 376037376 (358 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT INTEL845> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xdff80000-0xdfffffff,0xd0000000-0xd7ffffff irq 16 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe400-0xe41f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe800-0xe81f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pci3: <display, VGA> at device 5.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xdfdfbf00-0xdfdfbfff irq 17 at device 10.0 on pci3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0b:6a:66:64:b3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xdc00-0xdc3f,0xe000-0xe0ff mem 0xdff7b900-0xdff7b9ff,0xdff7ba00-0xdff7bbff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Unknown AC97 Codec (id = 0x434d4983)>
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x204 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2790956669 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 38166MB <WDC WD400BB-00JHA0/05.01C05> [77545/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SH-152A/C503> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
%
I hope all the above answered your questions Chuck and maybe gives you and others some more info :)
YMMV,
Eric
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
