Hello Emanuel,
THanks for your help. My usbdevs -v:
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 powered
port 2 addr 3: full speed, power 90 mA, config 1, USB <->
Serial(0x6001), FTDI(0x0403), rev 4.00
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
I am not really sure what my device is. I kldloaded all 3 modules you
suggested, but nothing different came up in /var/log/messages.
Paulo
--- Emanuel Strobl <[EMAIL PROTECTED]> wrote:
> Am Freitag, 11. März 2005 17:33 schrieb Paulo Roberto:
> > Hello,
> >
> > I am not able to use a usb/serial converter with minicom. I loaded
> ucom
> > and uplcom, but only ugen messages are printed on the console.
> >
> > ugen0: FTDI USB <-> Serial, rev 1.10/4.00, addr 2
> >
> > I tried ugen0, ugen0.1 and ugen0.2 with no success.
>
> What does "usbdevs -v" say?
>
> Perhaps you have a umct(4) or uftdi(4) or uvscom(4) and no uplcom
> adapter.
>
> -Harry
__________________________________
Do you Yahoo!?
Make Yahoo! your home page
http://www.yahoo.com/r/hs
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
