I added this line to the configuration file of the kernel
device ehci
rebooted the system and conected the usb disk and i get the same
transfers speed
1.00MB/s and in the /boot/kernel/ directory there is not ehci.ko file
i have to add another line to the configuration file or it's compiled
into the kernel
Osmany
On 02/24/05 17:00, Osmany Guirola Cruz wrote:
> Hi
> i have an usb 2.0 external harddisk this is the info
>
> umass0: Maxtor OneTouch, rev 2.00/2.00, addr 2
> umass0: Get Max Lun not supported (STALLED)
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Maxtor OneTouch 0201> Fixed Direct Access SCSI-0 device
> da0: 1.000MB/s transfers
> da0: 117246MB (240119808 512 byte sectors: 255H 63S/T 14946C)
>
> Why the speed it's so slow? i have a 2.0 usb card :-(
> How can i change the transfer speed
>
You'll need device ehci in your kernel or module ehci.ko loaded. Even
then, the reported speed is not always correct.
To find out at what speed your device is running, try to transfer some
large file with dd.
HTH,
Phil.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
