Hi Rob, It runs well but you have to turn ACPI off at boot...
Ganaël LAPLANCHE [EMAIL PROTECTED] http://www.martymac.com Tel : (+33)6.84.03.57.24. ---------- Original Message ----------- From: Robert McHugh <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Thu, 6 Jan 2005 20:18:26 -0500 (EST) Subject: Asus K8N-E and slow disk transfer (fwd) > Hello Ganael, > > I have the same motherboard with two 160gb western digital sata disks. > I never ran any benchmarks on them, but the performance is nice. > > I was curious to know if you were able to get the amd64 release of FreeBSD > > 5.3 to run on your system. I tried many times but the install hangs when > it calls out to sysinstall. The 32 bit version runs fine. > > Thanks and good luck, > Rob > > ---------- Forwarded message ---------- > Date: Thu, 6 Jan 2005 16:50:05 +0000 > From: Ganael Laplanche <[EMAIL PROTECTED]> > To: freebsd-questions@freebsd.org > Subject: Asus K8N-E and slow disk transfer > > [This is a repost from the amd64 list] > > Hi all, > > I've just bought an ASUS K8N-E mobo. I'm using FreeBSD-5.3-Stable > (amd64) and suffering from *very* slow disk transfer rates. The > chipset is an nforce3 and is correctly detected at boot : > > # dmesg > [...] > atapci0: <nVidia nForce3 Pro UDMA133 controller> port > 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci > 0 [...] > > My disk is an UDMA100 one, everything seems to be correct : > # atacontrol mode 0 > Master = UDMA100 > Slave = BIOSPIO > > # sysctl -a > [...] > hw.ata.atapi_dma: 1 > hw.ata.ata_dma: 1 > [...] > > I use a new 80 lead ATA cable (shipped with my mobo)... Evrything > should be okay, but the whole system is very very slow. Copying a 600 > MB takes about 10 minutes (1 MB/sec) and makes the system nearly > unusable during the copy. > > Do you have any idea ? > > Ganaël LAPLANCHE > [EMAIL PROTECTED] > http://www.martymac.com > Tel : (+33)6.84.03.57.24. > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" ------- End of Original Message ------- _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
