I've just installed FreeBSD (after removing it due to portupgrade gone awry), did CVSup and now trying to build a custom kernel.
make depend was successful
but I get the following error messages when doing 'make'
[EMAIL PROTECTED] /usr/src/sys/i386/compile/C-KERNEL#] make linking kernel umass.o(.text+0x1ab3): In function `umass_cam_attach_sim': : undefined reference to `cam_simq_alloc' umass.o(.text+0x1b04): In function `umass_cam_attach_sim': : undefined reference to `cam_sim_alloc' umass.o(.text+0x1b13): In function `umass_cam_attach_sim': : undefined reference to `cam_simq_free' umass.o(.text+0x1b35): In function `umass_cam_attach_sim': : undefined reference to `xpt_bus_register' umass.o(.text+0x1b61): In function `umass_cam_rescan_callback': : undefined reference to `xpt_free_path' umass.o(.text+0x1bd4): In function `umass_cam_rescan': : undefined reference to `xpt_periph' umass.o(.text+0x1be3): In function `umass_cam_rescan': : undefined reference to `xpt_create_path' umass.o(.text+0x1bff): In function `umass_cam_rescan': : undefined reference to `xpt_setup_ccb' umass.o(.text+0x1c1c): In function `umass_cam_rescan': : undefined reference to `xpt_action' umass.o(.text+0x1cfa): In function `umass_cam_detach_sim': : undefined reference to `xpt_bus_deregister' umass.o(.text+0x1d16): In function `umass_cam_detach_sim': : undefined reference to `cam_sim_free' umass.o(.text+0x1d5d): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1dd6): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1df5): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1e9d): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1f71): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x1fbf): more undefined references to `xpt_done' follow umass.o(.text+0x2185): In function `umass_cam_action': : undefined reference to `cam_calc_geometry' umass.o(.text+0x218d): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x219e): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x21af): In function `umass_cam_action': : undefined reference to `xpt_done' umass.o(.text+0x2221): In function `umass_cam_cb': : undefined reference to `xpt_done' umass.o(.text+0x231b): In function `umass_cam_cb': : undefined reference to `xpt_done' umass.o(.text+0x233f): more undefined references to `xpt_done' follow *** Error code 1
'make'
Stop in /usr/src/sys/i386/compile/C-KERNEL. [EMAIL PROTECTED] /usr/src/sys/i386/compile/C-KERNEL#] --------------
This is my kernel conf
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.6.2.2 2004/10/24 18:02:52 scottl Exp $
machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident C-KERNEL
# To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices.
options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device #options NFSCLIENT # Network Filesystem Client #options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive.
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots device isa #device eisa device pci device agp
# Floppy drives device fdc
# ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console device sc
# Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable. device npx
# Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer
# PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus
# Serial (COM) ports device sio # 8250, 16[45]50 based serial ports
# Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc
# PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit ethernet #device nge # NatSemi DP83820 gigabit ethernet #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet
# ISA devices that use the old ISA shims #device le
# Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP #device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter
# USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic #device uhid # "Human Interface Devices" device ukbd # Keyboard #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet
# FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!)
--
Since I have no SCSI devices, I've removed anything that has something to do with SCSI from the conf files. Could that be it ? (if you cant tell by now, I am fairly new to this :-)
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
