Hi,
I have it working, though could not manage to get the hardware RAID going:
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1
acd0: CDRW <HL-DT-ST GCE-8160B/1.02> at ata0-master PIO4 ad4: 78167MB <Maxtor 6Y080M0/YAR51BW0> [158816/16/63] at ata2-master SATA150 ad6: 78167MB <Maxtor 6Y080M0/YAR51BW0> [158816/16/63] at ata3-master SATA150
NB if you recompile your kernel leave ATA_STATIC_ID in.
Regards, Nigel.
M�rio Gamito wrote:
Hi,
Searching in the hardware suported by 5.3 i see no (obvious) reference to Intel ICH5 SATA disk controler.
But googling for "intel ich5 freebsd", there are lots os links about this issue.
Some talk about patches, even in this list, several months before 5.3
In the end, i do not know if this controler is or isn't suported natively by FreeBSD 5.3, and if not, how can one make it work.
Any help would be apreciated. I have a server to re-install from Linux to FreeBSD tomorrow :(
Warm Regards.
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
