At Fri, 12 Nov 2004 it looks like Susumu Tanabe composed: > > Hello, > I want to install XF86 on my notebook > Toshiba Satellite A60. > Whioch kind of configuration file is necessary? > The following trials gave no results. > yours, Susumu Tanabe
If you can't get any basic "baselines" to go on from any other source, you may find some help on laptops like this here: http://tuxmobil.org/toshiba.html I've used this site in the past to download some XF86Config files and get some bits of helpful information. > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > > > > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > > Section "Module" > Load "dbe" > Load "dri" > Load "extmod" > Load "glx" > Load "record" > Load "xtrap" > Load "speedo" > Load "type1" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbLayout" "us,ru" > Option "XkbOptions" "grp:lalt_toggle" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/sysmouse" > EndSection > > Section "Monitor" > #DisplaySize 300 230 # mm > Identifier "Monitor0" > VendorName "HWP" > ModelName "b18" > Option "DPMS" > HorizSync 31.5-75.0 > VertRefresh 50-90 > EndSection > > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "NoAccel" # [<bool>] > #Option "SWcursor" # [<bool>] > #Option "Dac6Bit" # [<bool>] > #Option "Dac8Bit" # [<bool>] > #Option "DMAForXv" # [<bool>] > #Option "ForcePCIMode" # [<bool>] > #Option "CCEPIOMode" # [<bool>] > #Option "CCENoSecurity" # [<bool>] > #Option "CCEusecTimeout" # <i> > #Option "AGPMode" # <i> > #Option "AGPSize" # <i> > #Option "RingSize" # <i> > #Option "BufferSize" # <i> > #Option "Display" # <str> > #Option "PanelWidth" # <i> > #Option "PanelHeight" # <i> > #Option "ProgramFPRegs" # [<bool>] > #Option "UseFBDev" # [<bool>] > #Option "VideoKey" # <i> > #Option "ShowCache" # [<bool>] > Identifier "Card0" > Driver "ati" > VendorName "ATI Technologies Inc" > BoardName "Rage 128 PF/PRO AGP 4x TMDS" > BusID "PCI:1:0:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Depth 1 > EndSubSection > SubSection "Display" > Depth 4 > EndSubSection > SubSection "Display" > Depth 8 > EndSubSection > SubSection "Display" > Depth 15 > EndSubSection > SubSection "Display" > Depth 16 > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" > EndSubSection > DefaultDepth 24 > EndSection > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > %%%%%%%%%%# XFree86 4 configuration created by pyxf86config > > Section "ServerLayout" > Identifier "Default Layout" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > InputDevice "DevInputMice" "AlwaysCore" > EndSection > > Section "Files" > # RgbPath is the location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Red Hat 6.0 and later now use a font server independent of > # the X server to render fonts. > > RgbPath "/usr/X11R6/lib/X11/rgb" > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > EndSection > > Section "InputDevice" > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # To disable the XKEYBOARD extension, uncomment XkbDisable. > # Option "XkbDisable" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > # Or if you just want both to be control, use: > # Option "XkbOptions" "ctrl:nocaps" > # > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "PS/2" > Option "Device" "/dev/psaux" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "InputDevice" > # If the normal CorePointer mouse is not a USB mouse then > # this input device can be used in AlwaysCore mode to let you > # also use USB mice at the same time. > Identifier "DevInputMice" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "no" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Toshiba" > ModelName "Satellite P25 Display" > HorizSync 29.0 - 55.0 > VertRefresh 0.0 - 60.0 > Option "dpms" > > ModeLine "1400x900" 77 1400 1408 1416 1424 900 901 902 903 > EndSection > > Section "Device" > Identifier "Videocard0" > Driver "nvidia" > VendorName "NVIDIA" > BoardName "NVIDIA GeForce FX Go5200" > VideoRam 32768 > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1400x900" > EndSubSection > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > > # laps /etc/X11/XF86Config > # gets manually copied to ~jhs/public_html/hw/toshiba/s5100-603/XF86Config > # to rebuild use xf86cfg -textmode, then sellect vesa, then haand tune. > # Section "InputDevice" > # Identifier "Mouse0" > # Driver "mouse" > # Option "Protocol" "auto" > # Option "Device" "/dev/sysmouse" > # EndSection > > Section "ServerLayout" > Identifier "Layout0" > Screen 0 "Screen0" 0 0 > InputDevice "Keyboard0" "CoreKeyboard" > InputDevice "Mouse0" "CorePointer" > EndSection > > Section "Files" > > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > > Section "Module" > > # Load "freetype" > # Load "xtt" > Load "extmod" > Load "glx" > Load "dri" > Load "dbe" > Load "record" > Load "xtrap" > Load "type1" > Load "speedo" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "Auto" > Option "Device" "/dev/sysmouse" > > # next 2 from gary > # for the scroll wheel - 4 and 5 are virtual buttons > Option "Buttons" "5" > # button 4 = negative movements, button 5 = positive movements > Option "ZAxisMapping" "4 5" > > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbModel" "pc101" > Option "XkbLayout" "us" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Toshiba" > ModelName "S5100-603" > HorizSync 31.5 - 108.0 # Toshiba User's Manual Chapter E > VertRefresh 50.0 - 100.0 # Just a guess > # manual quotes 15" > # x 2.54 = 381 mm > # Assume a 1024:768 ratio > # Use Pythagorus > # diag^2 = 1024^2 + 768^2 > # diag^2 = 1024^2 + 768^2 > # diag^2 = 1048576 + 589824 > # diag^2 = 1638400 > # diag = 1280 > # Width = 381 mm x 1024 / 1280 = 304.8 > # Height = 381 mm x 768 / 1280 = 228.6 > DisplaySize 305 229 > > EndSection > > Section "Device" > > # VendorName "nVidia Corporation" # xf86cfg visualmode > # BoardName "NV17 [GeForce4 440 Go]" # xf86cfg visualmode > # xf86cfg -textmode > # xf86cfg -textmode > # BusID "PCI:1:0:0" # xf86cfg visualmode > Identifier "Card0" > Driver "nv" > ChipSet "GeForce4 440 Go" > Card "nv GeForce4 440 Go" > EndSection > > Section "Screen" > > # Toshiba User's Manual Chapter E: > # 15.0" TFT LCD will do 1024x768, 1400x1050, 1600x1200 > # extern monitor will do 2048 x 1536 @ 16M colours > # DefaultDepth 16 > # xf86cfg -textmode > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" > "1152x864" "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > -- Bill Schoolcraft | Life's journey is not to arrive at the PO Box 210076 | grave safely in a well preserved body, San Francisco,CA 94121 | but rather to skid in sideways, totally http://billschoolcraft.com | spent, yelling "holy shit, what a ride!" _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
