Just to close this thread, the SD card reader worked beautifully. I
bought a Lexar JumpDrive Trio which cost less than US$20.
Ada
On Thu, 11 Nov 2004, Greg 'groggy' Lehey wrote:
On Wednesday, 10 November 2004 at 8:58:27 -0500, Ada Cheng wrote:
Good morning,
I am trying to connect my Minolta Z2 camera with my box, currently
running 4.10 stable.
...
After rebuilding the kernel and rebooting, I tested the configuration by
plugging in my camera. The following is the output of dmesg:
umass0: KONICA_MINOLTA DiMAGE Z2, rev 2.00/1.00, addr 2
umass0: BBB reset failed, TIMEOUT (this is repeated if I don't unplug the
camera)
Hmm. Not good.
If I do a camcontrol devlist I obtain
<KMCA DiMAGE Z2 1.00> at scbus1 target 0 lun 0 (probe0)
so I guess the camera is recognized but no device node was probed.
I am also getting the following error when i do
$mount -t msdos -r /dev/da0s1c /camera
msdos: /dev/da0s1c: Device not configured
which I guess isn't too surprising.
I have read various threads regarding this TIMEOUT failure error and
some has suggested doing some quirks with the src/sys/cam/scsi/scsi_da.c
file which I am not comfortable with doing.
I'm in a similar (but not the same) situation with a Ricoh camera. I
can understand your position.
Will a SD card reader solve this problem?
Almost certainly. That's what I did.
See http://www.lemis.com/grog/diary-nov2004.html#7 for more details.
Greg
--
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
