You didn't specify the type of motherboard or SATA RAID chipset, but all of those onboard RAID controllers are not true hardware raid (Host raid) and require special software drivers in the OS. You are much better off purchasing a separate hardware raid controller such as the 3Ware 8006-2LP 2 port, 3Ware 9500S-4LP 4 port, Adaptec 2410SA 4-port controllers. They do true hardware raid and work with FreeBSD.
Hope that answers your question.
Thanks,
-- Scott A. Gerhardt, P.Geo. Gerhardt Information Technologies On Nov 5, 2004, at 12:32 PM, Marc G. Fournier wrote:
"Dual-channel SATA 100 (two connectors) integrated with RAID 0 and 1 support"
If I have 4 drives in the above, could I stripe two to each other and then mirror those together? Or is it strip *or* mirror?
also, not sure if this is a no brainer, but would FreeBSD support that resultant array?
----
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email: [EMAIL PROTECTED] Yahoo!: yscrappy ICQ: 7615664
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
