-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Monday 19 July 2004 05:28 pm, [EMAIL PROTECTED] wrote: > From: Anish Mistry <[EMAIL PROTECTED]> > Date: Monday, July 19, 2004 11:21 am > > > On Monday 19 July 2004 05:10 pm, [EMAIL PROTECTED] wrote: > > > Aloha > > > > > > I had previously started a thread with this problem and although I > > > received several suggestions the problem was never solved. > > > http://lists.freebsd.org/pipermail/freebsd-questions/2004- > > > > June/050819.html> > > > > > Below I have included more information. If I change an 8MB card for > > > another 8MB card everything works as it should. If I try a > > > > different size > > > > > card it fails. > > > > > > In addition, if I boot with no card in the slot, I cannot get a > > > > slice to > > > > > initiate in /dev. i.e. I will see /dev/da0 - /dev/da3. When I > > > > boot with > > > > > a card in the slot I see /dev/da2s1 as seen below. This problem > > > > has been > > > > > reported by others (found through google) but again there was no > > > > solution.> Is there a friend that I am unaware of? > > > > > I have tried various attempts with camcontrol without any good > > > > results. If > > > > > I unplug and replug the USB cable both of the above problems are > > > > corrected.> I don't feel that is a viable solution. My wife has WXP > > on her computer and > > > > > it will update with the changing of a card. I really need a > > > > friend that > > > > > will rescan or update the USB connection. > > > > > > Here are the related parts of dmesg.boot. da4 is a thumb drive > > > > and da1-3 > > > > > are the 4 slots of my card reader. The SmartMedia card is in da2. > > > > > > GEOM: create disk da0 dp=0xc2e44050 > > > GEOM: create disk da1 dp=0xc2dacc50 > > > GEOM: create disk da2 dp=0xc2e47450 > > > GEOM: create disk da3 dp=0xc2e45850 > > > GEOM: create disk da4 dp=0xc2e45450 > > > da4 at umass-sim1 bus 1 target 0 lun 0 > > > da4: <Generic STORAGE DEVICE 1033> Removable Direct Access SCSI-0 > > > > device> da4: 1.000MB/s transfers > > > > > da4: 250MB (512000 512 byte sectors: 64H 32S/T 250C) > > > da0 at umass-sim0 bus 0 target 0 lun 0 > > > da0: <USB2.0 CardReader CF RW 0814> Removable Direct Access SCSI- > > > > 0 device > > > > > da0: 1.000MB/s transfers > > > da0: Attempt to query device size failed: NOT READY, Medium not > > > > present> da1 at umass-sim0 bus 0 target 0 lun 1 > > > > > da1: <USB2.0 CardReader SD RW 0814> Removable Direct Access SCSI- > > > > 0 device > > > > > da1: 1.000MB/s transfers > > > da1: Attempt to query device size failed: NOT READY, Medium not > > > > present> da2 at umass-sim0 bus 0 target 0 lun 2 > > > > > da2: <USB2.0 CardReader SM RW 0814> Removable Direct Access SCSI- > > > > 0 device > > > > > da2: 1.000MB/s transfers > > > da2: 7MB (16000 512 byte sectors: 64H 32S/T 7C) > > > da3 at umass-sim0 bus 0 target 0 lun 3 > > > da3: <USB2.0 CardReader MS RW 0814> Removable Direct Access SCSI- > > > > 0 device > > > > > da3: 1.000MB/s transfers > > > da3: Attempt to query device size failed: NOT READY, Medium not > > > > present> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 > > 0 0 0 > > > > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > > (da0:umass-sim0:0:0:0): Medium not present > > > (da0:umass-sim0:0:0:0): Unretryable error > > > Opened disk da0 -> 6 > > > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > > (da0:umass-sim0:0:0:0): Medium not present > > > (da0:umass-sim0:0:0:0): Unretryable error > > > Opened disk da0 -> 6 > > > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > > > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > > > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > > > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > > > (da1:umass-sim0:0:0:1): Medium not present > > > (da1:umass-sim0:0:0:1): Unretryable error > > > Opened disk da1 -> 6 > > > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > > > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > > > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > > > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > > > (da1:umass-sim0:0:0:1): Medium not present > > > (da1:umass-sim0:0:0:1): Unretryable error > > > Opened disk da1 -> 6 > > > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > > > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > > > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > > > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > > > (da3:umass-sim0:0:0:3): Medium not present > > > (da3:umass-sim0:0:0:3): Unretryable error > > > Opened disk da3 -> 6 > > > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > > > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > > > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > > > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > > > (da3:umass-sim0:0:0:3): Medium not present > > > (da3:umass-sim0:0:0:3): Unretryable error > > > Opened disk da3 -> 6 > > > > > > > > > > > > %su > > > Password: > > > hp# ls -l /dev/da* > > > crw-r----- 1 root operator 4, 20 Jul 19 06:19 /dev/da0 > > > crw-r----- 1 root operator 4, 21 Jul 19 06:19 /dev/da1 > > > crw-r----- 1 root operator 4, 22 Jul 19 06:19 /dev/da2 > > > crw-rw---- 1 robert robert 4, 25 Jul 19 06:19 /dev/da2s1 > > > crw-r----- 1 root operator 4, 23 Jul 19 06:19 /dev/da3 > > > crw-r----- 1 root operator 4, 24 Jul 19 06:19 /dev/da4 > > > crw-rw---- 1 robert robert 4, 26 Jul 19 06:19 /dev/da4s1 > > > hp# > > > > > > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > > > > > hp# ls -l /mnt/olympus/dcim/100olymp > > > total 680 > > > -rwxr-xr-x 1 root wheel 694158 Jul 12 18:27 p7120001.jpg > > > hp# > > > hp# umount /mnt/olympus > > > > > > <here I change the SM card with another 8MB SM card> > > > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > > hp# ls -l /mnt/olympus/dcim/100olymp > > > total 1352 > > > -rwxr-xr-x 1 root wheel 704002 Jan 1 2000 p1010001.jpg > > > -rwxr-xr-x 1 root wheel 679720 Jan 1 2000 p1010002.jpg > > > hp# > > > hp# umount /mnt/olympus > > > > > > <then I change it back to the original> > > > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > > hp# ls -l /mnt/olympus/dcim/100olymp > > > total 680 > > > -rwxr-xr-x 1 root wheel 694158 Jul 12 18:27 p7120001.jpg > > > > > > hp# umount /mnt/olympus > > > > > > <now I insert a 128MB SM card> > > > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > > mount_msdosfs: /dev/da2s1: Invalid argument > > > hp# > > > > Have you tried a "camcontrol rescan all" before inserting the new > > disk? > > - -- > > I had tried camcontrol rescan 0:0:2 and it did not work > I just tried camcontrol rescan all and it did not work. > Thanks for the response. Any thing else??? Please =) I started to get this too, and just got an answer on the CURRENT list. What you need to do the rescan the GEOM structure is: cat /dev/null > /dev/da0 cat /dev/null > /dev/da1 etc... This worked for me. Apparently camcontrol was doing stuff before is wasn't "supposed to." Hope this helps. - -- Anish Mistry -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD)
iD8DBQFBKixBxqA5ziudZT0RAiJTAJ93eM1hQsWaMK4hN48BQCuIwYfjpwCg2roG hD1sIIjTHIT/QFWNilA2nzM= =DE97 -----END PGP SIGNATURE----- _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
