If Generic compiles, then my file would compile too because I only copied Generic and comment out iir. Then I got that message.
Now I tried to work with an even smaller version of the file and removed and uncommented a lot, but still I get the same error (and look at my new configuration file below error message): >===> iir > >@ -> /usr/src/sys > >machine -> /usr/src/sys/i386/include > >touch opt_scsi.h > >touch opt_cam.h > >perl @/kern/makeops.pl -h @/kern/device_if.m > >perl @/kern/makeops.pl -h @/kern/bus_if.m > >perl @/kern/makeops.pl -h @/pci/pci_if.m > >rm -f .depend > >mkdep -f .depend -a -nostdinc -D_KERNEL > -DKLD_MODULE > >-I- -I. -I@ -I@/../include > >-I/usr/obj/usr/src/i386/usr/include > >/usr/src/sys/modules/iir/../../dev/iir/iir.c > >/usr/src/sys/modules/iir/../../dev/iir/iir_ctrl.c > >/usr/src/sys/modules/iir/../../dev/iir/iir_pci.c > >*** Error code 1 > > > >Stop in /usr/src/sys/modules/iir. > >*** Error code 1 > > > >Stop in /usr/src/sys/modules. > >*** Error code 1 > > > >Stop in /usr/obj/usr/src/sys/MIJNKERNEL. > >*** Error code 1 > > > >Stop in /usr/src. > >*** Error code 1 My configuration file is now: # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.59 2004/04/07 20:29:01 vkashyap Exp $ machine i386 cpu I686_CPU ident MYKERNEL maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device agp # support several AGP chipsets # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558 # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? disable port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? disable port 0x280 irq 10 drq 0 device cs0 at isa? disable port 0x300 device sn0 at isa? disable port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) --- adam <[EMAIL PROTECTED]> wrote: > I just took a quick glance at your file, but will > this compile if you > uncomment iir??? You certainly have a lot of things > included in your > config file. Re-enabling some options will help you > narrow down whether > or not the problem is in fact the iir being > commented out or whether > something that depends on iir isn't commented out. > Sorry for the > jumbled wording, I haven't had my coffee yet. > > Adam > > Dino Vliet wrote: > > >I want to compile a new kernel on my laptop running > >freebsd 4.10. > > > >Although I commented out device iir in my kernel > >configuration file, I still get an error message > when > >trying to make my kernel. Look at my kernel > >configuration file which I attached to this > message. > > > >Can somebody help me to get this fixed? > > > >Brgds > > > >I'm getting this error message: > > > >===> iir > >@ -> /usr/src/sys > >machine -> /usr/src/sys/i386/include > >touch opt_scsi.h > >touch opt_cam.h > >perl @/kern/makeops.pl -h @/kern/device_if.m > >perl @/kern/makeops.pl -h @/kern/bus_if.m > >perl @/kern/makeops.pl -h @/pci/pci_if.m > >rm -f .depend > >mkdep -f .depend -a -nostdinc -D_KERNEL > -DKLD_MODULE > >-I- -I. -I@ -I@/../include > >-I/usr/obj/usr/src/i386/usr/include > >/usr/src/sys/modules/iir/../../dev/iir/iir.c > >/usr/src/sys/modules/iir/../../dev/iir/iir_ctrl.c > >/usr/src/sys/modules/iir/../../dev/iir/iir_pci.c > >*** Error code 1 > > > >Stop in /usr/src/sys/modules/iir. > >*** Error code 1 > > > >Stop in /usr/src/sys/modules. > >*** Error code 1 > > > >Stop in /usr/obj/usr/src/sys/MIJNKERNEL. > >*** Error code 1 > > > >Stop in /usr/src. > >*** Error code 1 > > > > > > > > > > > >__________________________________ > >Do you Yahoo!? > >Yahoo! Mail Address AutoComplete - You start. We > finish. > >http://promotions.yahoo.com/new_mail > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >[EMAIL PROTECTED] mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > > > > > > > -- > www.erictheninja.org > A bunch of crap, but it'll be there soon > > Buy my ebay stuff...you know you want to > http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=biddingman12&include=0&since=-1&sort=3&rows=50 > > _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain names from Yahoo! Enter now. http://promotions.yahoo.com/goldrush _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
