On Wed, 28 Jul 2004, Dan Nelson wrote: > In the last episode (Jul 28), [EMAIL PROTECTED] said: > > A few months ago I brought up a new server using an Adaptec 2200S RAID > > card, and it's been running fine with a RAID 1 array on channel 0. Today > > I tried to move the DLT (Quantum 4000) over to this server to make it the > > amanda server, so I plugged it into the controller's external port for > > channel 1. When I do, neither amanda or mt will see the device, I get: > > > > mt: /dev/nsa0: Device not configured > > This could mean that there's no tape in the drive. Does "camcontrol > devlist" see the drive? Also make sure you have the "aacp" device in the > kernel; that allows non-disk devices to pass through the raid controller and > be seen by FreeBSD.
The "aacp" device did the trick, for both the drive and camcontrol. Thanks! James Smallacombe PlantageNet, Inc. CEO and Janitor [EMAIL PROTECTED] http://3.am ========================================================================= _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
