Hi,
Im a freeBSD newbie & have been struggling for some
time to get my adsl connection working on Freebsd
5.2.1 Release. I've tried many suggested
configurations for /etc/ppp/ppp.conf, and /etc/rc.conf
& read relevant chapters from 'Complete FreeBSD' & the
handbook, but my connection still dies before reaching
the LCP phase.
Im using an Alcatel Speedtouch 530 Modem connected to
Ethernet. My ADSL connection is fine in Windoze
however the configuration for the modem is usually set
through a web-browser. Do the modem settings(done via
browser) affect the connection in FBSD or does the
system simply take the settings from ppp.conf etc? Im
somewhat confused on this point. I can ping the modem
at 10.0.0.138 and can open the web interface in X.
The log reads:
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase: bundle:
Establish
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: closed -> opening
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: List of
netgraph node ``sis0:'' (id 1) hooks:
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Found
orphans -> ethernet
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug:
Connecting netgraph socket .:tun1 -> [3]::tun1
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Sending
PPPOE_CONNECT to .:tun1
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Found
the following interfaces:
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Index
1, name "sis0"
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Index
2, name "lp0"
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Index
3, name "lo0"
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Index
4, name "tun0"
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Index
5, name "tun1"
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: Connected!
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: opening -> dial
Jun 25 20:00:26 brycepc ppp[801]: tun1: Chat: deflink:
Dial attempt 1 of 1
Jun 25 20:00:26 brycepc ppp[801]: tun1: Phase:
deflink: dial -> carrier
Jun 25 20:00:26 brycepc ppp[801]: tun1: Debug: Waiting
for carrier
Jun 25 20:00:30 brycepc last message repeated 4 times
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: Disconnected!
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: carrier -> hangup
Jun 25 20:00:31 brycepc ppp[801]: tun1: Debug:
deflink: Close
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: Connect time: 5 secs: 0 octets in, 0 octets
out
Jun 25 20:00:31 brycepc ppp[801]: tun1: Phase:
deflink: 0 packets in, 0 packets out
Any help is greatly appreciated I really would like to
end my reliance on M$ and get going with BSD :)
Bryce
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
