Hello,
Can any of you kind teeps help me out please? I'm trying to compile my FreeBSD 4.9 kernel for the first time and am having problems.
I am recompiling for several reasons; to learn about compiling the kernel; to get sound support for my isa soundcard and (finally); to compile in some firewall options mentioned in the handbook.
Here's what I've done:
1. used /stand/sysintsall to install the sys/src to my pc (from CD) 2. cd /usr/src/sys/i386/conf/ 3. cp GENERIC SNDK 4. emacs SNDK (made only a few changes - see below for specifics) 5. /usr/sbin/config SNDK (this went ok, no warnings or errors) 6. cd ../../compile/SNDK 7. make depend
-- and here's where I get the following error:
<output>
su-2.05b# make depend
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -I../../contrib/dev/acpica -I../../contrib/ipfilter -D_KERNEL -include opt_global.h -mpreferred-stack-boundary=2 ../../i386/i386/genassym.c
In file included from ../../sys/inttypes.h:9,
from ../../sys/types.h:48,
from ../../sys/param.h:64,
from ../../i386/i386/genassym.c:44:
machine/ansi.h:118: redefinition of `__int64_t'
machine/_types.h:58: `__int64_t' previously declared here
machine/ansi.h:119: redefinition of `__uint64_t'
machine/_types.h:59: `__uint64_t' previously declared here
machine/ansi.h:130: redefinition of `__int8_t'
machine/_types.h:45: `__int8_t' previously declared here
machine/ansi.h:131: redefinition of `__uint8_t'
machine/_types.h:46: `__uint8_t' previously declared here
machine/ansi.h:132: redefinition of `__int16_t'
machine/_types.h:47: `__int16_t' previously declared here
machine/ansi.h:133: redefinition of `__uint16_t'
machine/_types.h:48: `__uint16_t' previously declared here
machine/ansi.h:134: redefinition of `__int32_t'
machine/_types.h:49: `__int32_t' previously declared here
machine/ansi.h:135: redefinition of `__uint32_t'
machine/_types.h:50: `__uint32_t' previously declared here
machine/ansi.h:137: redefinition of `__intptr_t'
machine/_types.h:77: `__intptr_t' previously declared here
machine/ansi.h:138: redefinition of `__uintptr_t'
machine/_types.h:94: `__uintptr_t' previously declared here
machine/ansi.h:147: conflicting types for `__mbstate_t'
../../sys/_types.h:100: previous declaration of `__mbstate_t'
machine/ansi.h:147: warning: redundant redeclaration of `__mbstate_t' in same scope
../../sys/_types.h:100: warning: previous declaration of `__mbstate_t'
In file included from ../../sys/param.h:64,
from ../../i386/i386/genassym.c:44:
../../sys/types.h:139: redefinition of `size_t'
../../../include/stddef.h:55: `size_t' previously declared here
*** Error code 1
Stop in /usr/src/sys/compile/SNDK. su-2.05b# </output>
In case you wish to see what changes i've made to the kernel, here's my SNDK version of the GENERIC file:
<sndk>
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46 simokawa Exp $
machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident SNDK maxusers 0
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.# To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO #options HTT # HyperThreading Technology
device isa #device eisa device pci
# Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0
# ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic MPT/Fusion
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configureddevice adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa?
device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50
# SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device dpt # DPT Smartcache - See LINT for options! device iir # Intel Integrated RAID device mly # Mylex AcceleRAID/eXtremeRAID device ciss # Compaq SmartRAID 5* series
# RAID controllers device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver pseudo-device splash
# syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device agp # support several AGP chipsets
# Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da
# PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? disable port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? disable port 0x280 irq 10 drq 0 device cs0 at isa? disable port 0x300 device sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter
# USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet
# FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!)
#john device pcm options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10
</SNDK>
The only changes I have made are:
*setting the cpu to 686 (pc here is a Pentium 2 400mhz and dmesg reckons it is a 686 class cpu)
*commenting out eisa support (don't have any of these cards)
*adding firewall stuff
*adding pcm line
I have tried just using the GENERIC kernel but this fails with the same error also.
Have also tried adding sys/src from /stand/sysinstall but instead of using cd to update, have tried the FreeBSD ftp site, but this still gave the same error.
I have also tried googling about and searching google-groups but to no avail!
Can any of you kind teeps point me in the direction of where I'm going wrong?
Cheers,
John H
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
