Hi, On Fri, Feb 20, 2004 at 07:37:49PM -0300, Roberto Pereyra wrote: > > A question: > > I want to configure a simple dial-up server and have this ppp.conf > > -------------------------- > default: > > pap: > set debug phase lcp chat > set timeout 0 set debug phase lcp chat > enable pap > set ifaddr 192.168.0.1 192.168.0.101-192.168.0.104 255.255.255.0 > enable proxy > accept dns > set dns 192.168.0.1 > load server > set radius /etc/radius.conf > ------------------------------------ > > My dial-up server (192.168.0.170) is not the internet gateway (192.168.0.1) > > The line: > > set ifaddr 192.168.0.1 192.168.0.101-192.168.0.104 255.255.255.0 > > is right ? the first ip must be the system gateway or must be the dial-up server ip ?
I think it should be the gateway as you are going to be proxying the dialup users onto your local LAN. The dialup box will proxy-arp the dialup users to the LAN and will forward their packets to the gateway. I have a similar setup to what you describe. In my case the dialup is also the gateway which makes it simpler. My config is: server: set timeout 0 set enddisc mac enable chap chap81 pap passwdauth enable proxy set ifaddr 192.168.3.2 192.168.3.80-192.168.3.100 255.255.255.255 set server /var/run/ppp/ppp-server-%d "" 0177 set dns 192.168.3.2 set nbns 192.168.3.2 accept dns Regards, Tony _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
