Hello,
I am running 5.2-RELASE on a Celeron/366.
After I installed the Edimax WLAN 22Mbps PCI Card (which says
'Model Name: GL2422VP'). I experience the following problem:
running `pciconf -lv` says
...
[EMAIL PROTECTED]:11:0:class=0x028000 card=0x850116ab chip=0x8400104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = '802.11b+ 22Mbps Wireless Adapter'
class = network
...
and no interface is created for the device. My KERNCONF
contains wlan, wi, awi, an, and wl.
See the attached KERNCONF, dmesg and pciconf.
What does it mean for the card to be 'recognized' by pciconf,
yet not being attached a driver? Did somebody get the card running?
Thank you
Jan
[EMAIL PROTECTED]:0:0: class=0x060000 card=0x00000000 chip=0x06911106 rev=0x22
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C691/693A/694X Apollo Pro/133/133A System Controller'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:1:0: class=0x060400 card=0x00000000 chip=0x85981106 rev=0x00
hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'VT82C598MVP/694x Apollo MVP3/Pro133x PCI to AGP Bridge'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:7:0: class=0x060100 card=0x00001106 chip=0x05961106 rev=0x09
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C596/A/B "Mobile South" PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
[EMAIL PROTECTED]:7:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x06
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
[EMAIL PROTECTED]:7:3: class=0x060000 card=0x00000000 chip=0x30501106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C596/596A/596 Power Management and SMBus Controller'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:10:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
[EMAIL PROTECTED]:11:0: class=0x028000 card=0x850116ab chip=0x8400104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
device = '802.11b+ 22Mbps Wireless Adapter'
class = network
[EMAIL PROTECTED]:12:0: class=0x040100 card=0x011113f6 chip=0x011113f6 rev=0x10
hdr=0x00
vendor = 'C-Media Electronics Inc.'
device = 'CMI8738/PCI C3DX PCI Audio Chip'
class = multimedia
subclass = audio
[EMAIL PROTECTED]:0:0: class=0x030000 card=0x93501462 chip=0x018110de rev=0xa4
hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GeForce4 MX 440 with AGP 8X [NV18.2]'
class = display
subclass = VGA
machine i386
cpu I686_CPU
ident HEVNE
##options SCHED_4BSD #4BSD scheduler
options SCHED_ULE #new scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options QUOTA #enable disk quotas
#options MSDOSFS #MSDOS Filesystem
#options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
##options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options PFIL_HOOKS # pfil(9) framework
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device sc
device splash # Splash screen and screen saver support
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
#device lpt # Printer
##device plip # TCP/IP over parallel
##device ppi # Parallel port interface device
device miibus # MII bus support
device rl
##device ed
# Wireless NIC cards
##device pccard # je to potreba pro modul if_wi
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NIC
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NIC
device wl
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device bpf # Berkeley packet filter
options MROUTING # Multicast routing
options PIM # Protocol Independent Multicast
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPDIVERT #divert sockets
options IPSTEALTH #support for stealth forwarding
options DUMMYNET
options BRIDGE
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE-p2 #3: Wed Feb 18 12:14:44 CET 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/HEVNE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0770000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc07701a4.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc0770254.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc0770300.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0770350.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc07703fc.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (367.50-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (128 MB)
avail memory = 124940288 (119 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc0738c62 (1000022)
VESA: NVidia
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdc40
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:10 INTA BIOS irq 10
pci_cfgintr: 0:11 INTA BIOS irq 12
pci_cfgintr: 0:12 INTA BIOS irq 10
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd8000000-0xdbffffff at device
0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 UDMA33 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem 0xe2011000-0xe20110ff irq 10
at device 10.0 on pci0
rl0: Ethernet address: 00:50:fc:e2:cf:20
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <network> at device 11.0 (no driver attached)
pcm0: <CMedia CMI8738> port 0xe000-0xe0ff irq 10 at device 12.0 on pci0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 367504445 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny,
logging limited to 100 packets/entry by default
GEOM: create disk ad0 dp=0xc1c6c160
ad0: 4112MB <WDC WD43AA> [8355/16/63] at ata0-master PIO4
acd0: CDROM <ASUS CD-S520/A4> at ata0-slave PIO4
GEOM: create disk ad2 dp=0xc1c4e760
ad2: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
