> > Hi, I have a 80gig drive (it was operational > in another machine) connected through Promise > Ultra 133 TX2 at boot time it is detected as > 155061/16/63 it contains a vinum drive, and > vinum reports its size is zero, I have traced b > ack the problem to the geometry > stand/sysinstall says it is more likely to be > 9729 cyls/255 heads/63 sectors
I seriously doubt it is geometry. It is normal for the system to report out different geometry from what the BIOS reports. The geometry the system reports is virtual (sort of fictional) rather than the actual physical geometry. It is probably OK though, of course, I could be wrong. Since you don't give any other information about what has been happening, it is hard to tell what might be the real problem. What was the other system and controller? What OS was it running? What have you tried? What errors do you see, etc, etc? > > How can I set this geometry without loosing data > on the disk .. (I couldnt find any possibility > to change geometry on the controller) You could not reset the geometry without losing data as far as I know. Anyway, that is probably not the problem so don't try until you find out a lot more information. ////jerry > -- > _(_)_ > (_. o_) F3CZ0 > (_,) http://feczo.nmi.rulez.org > ( ) __________________________ > // // _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
