Mike Jeays <[EMAIL PROTECTED]> writes:I am not sure what else there is to post. The machine gets to the point where
I have a Pentium 4 1.8 Ghz on an ASUS P4S533 motherboard. FreeBSD 5.1 fails to install - it just hangs while probing for devices, and I left it for many minutes. There is no ZIP or JAZZ drive; just an IDE disk and an LG CD-RW drive.
This machine installs and runs FreeBSD 4.7 with no problems, and the CD
for 5.1 has been used successfully on other machines. Any clues, please?
You don't provide much information here -- particularly for an "early adopters only" version of the OS.
Does this still occur with 5.2? Did the suggestions in the 5.1-RELEASE errata help? Or even change anything at all?
it says something like "Probing devices - this may take a while", and then
nothing else happens. I read the 5.1 errata, and tried switching from APIC
to PIC, and disabling the on-board sound card, but this made no difference.
Thanks for the reply.
Here is the dmesg output, using 4.7:
101 /usr/home/mike$ dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #1: Wed Jan 1 21:41:02 EST 2003
[EMAIL PROTECTED]:/usr/src/sys/compile/CHAUCER
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1816.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 536854528 (524272K bytes)
avail memory = 517021696 (504904K bytes)
Preloaded elf kernel "kernel" at 0xc0534000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1b20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0171 graphics accelerator> at 0.0 irq 3
isab0: <PCI to ISA bridge (vendor=1039 device=0961)> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 11 at device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 10 at device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 5 at device 5.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xe5000000-0xe50000ff irq 7 at device 10.0 on pci0
rl0: Ethernet address: 00:50:fc:72:7b:74
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio0: <3COM PCI FaxModem> port 0xa000-0xa007 irq 9 at device 11.0 on pci0
sio0: moving to sio4
sio4: type 16550A
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA33
acd0: CD-RW <HL-DT-ST GCE-8320B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
102 /usr/home/mike$
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
