On Sun, Dec 14, 2003 at 04:34:13PM +1100, matti k wrote:
> I have a problem whereby the nvidia drivers cause my system to
> hang/reboot a few seconds after startx. I have discovered that
> disabling the SMP/apic lines in the kernel fixes the problem. This
> occurs on 5.2-CURRENT and 4.9-RELEASE.
>
> I first noticed this problem after a motherboard swap. The old
> motherboard was a Tyan Tiger MP and it was running 5.1-CURRENT at the
> time and nvidia drivers were working fine with SMP kernel. The
> motherboard died so I replaced it with a MSI K7D Master-L (MPX
> chipset). After that the nvidia drivers stopped working if SMP kernel
> enabled.
>
> I have tried NO_MIXED_MODE, disabling acpi and a lot of other BIOS
> options but no luck. I don't know if this is an nvidia driver issue or
> a problem with this particular motherboard/chipset. Any help
> appreciated. Thanks.
>
I just upgraded my single socket A gigabyte GA-VAXP motherboard to a
dual socket A gigabyte GA-DPXDW+ yesterday. This motherboard is also
using the MPX chipset. I am having the same issue: As soon as I
enable SMP and apic in the kernel the nvidia drivers lock up. This
wouldn't be such a big deal to me, except I need the nvidia drivers to
use both heads on my video card (at least as far as I know) I'm attaching
a dmesg both with and without SMP enabled, as well as a copy of my
kernel config file, (I'm just toggling between SMP in there) and a copy
of my XF86Config (Once again, just toggling between the nv and nvidia
driver) I can give someone a shell on this box if it will help
troubleshoot, otherwise I can provide more information as needed.
FreeBSD twinathlon.tcbug.org 5.2-CURRENT FreeBSD 5.2-CURRENT #4:
Sun Dec 14 09:08:14 GMT 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/TWINATHLON i386
Thanks,
Josh Paetzel
[EMAIL PROTECTED]
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.384.2.2 2003/05/31 15:18:41 scottl Exp $
machine i386
cpu I686_CPU
ident TWINATHLON
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
#options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#device apic # Symmetric (APIC) I/O
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device ataraid
options ATA_STATIC_ID #Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ums # Mouse
device uscanner # Scanners
device pcm
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
# Load "freetype"
# Load "xtt"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
Load "speedo"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/ums0"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 64.3
VertRefresh 40.0 - 150.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
#ChipSet "GeForce4 Ti 4200"
Card "nv GeForce4 Ti 4200"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #3: Fri Dec 12 23:13:11 GMT 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/TWINATHLON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2b000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a2b1f4.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0a2b2a0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2b34c.
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) MP 2400+ (2000.08-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 805240832 (767 MB)
avail memory = 772472832 (736 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fcc00
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x50e0-0x50ff,0x5000-0x50df,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0xc000-0xc003 mem
0xfc000000-0xfc000fff,0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 Ti 4200> mem
0xf0000000-0xf007ffff,0xe8000000-0xefffffff,0xf8000000-0xf8ffffff irq 17 at device 5.0
on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xfb025000-0xfb025fff irq 19 at device 0.0
on pci2
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 17 at device 5.0 on pci2
pcm0: <eMicro EM28028 AC97 Codec>
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x9800-0x983f mem
0xfb000000-0xfb01ffff,0xfb024000-0xfb024fff irq 16 at device 7.0 on pci2
fxp0: Ethernet address 00:0d:61:20:2d:ad
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise PDC20276 UDMA133 controller> port
0xac00-0xac0f,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c07 mem
0xfb020000-0xfb023fff irq 18 at device 8.0 on pci2
atapci1: [MPSAFE]
ata2: at 0x9c00 on atapci1
ata2: [MPSAFE]
ata3: at 0xa400 on atapci1
ata3: [MPSAFE]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd27ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc62a6c60
ad0: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata0-master UDMA100
acd0: DVDROM <LITEON DVD-ROM LTD163D> at ata1-master PIO4
acd1: CDRW <SONY CD-RW CRX195E1> at ata1-slave PIO4
GEOM: create disk ad4 dp=0xc62a6a60
ad4: 76319MB <WDC WD800BB-00DAA3> [155061/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc639e660
ad6: 76319MB <WDC WD800BB-00CAA1> [155061/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc62a31e0
ar0: 152638MB <ATA RAID0 array> [19458/255/63] status: READY subdisks:
disk0 READY on ad6 at ata3-master
disk1 READY on ad4 at ata2-master
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s2a
Warning: pid 86512 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86665 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86670 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86673 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86767 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86825 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86826 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86831 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86861 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 86937 used static ldt allocation.
See the i386_set_ldt man page for more info
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #3: Fri Dec 12 23:13:11 GMT 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/TWINATHLON
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2b000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0a2b1f4.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0a2b2a0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a2b34c.
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) MP 2400+ (2000.08-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 805240832 (767 MB)
avail memory = 772472832 (736 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fcc00
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x50e0-0x50ff,0x5000-0x50df,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <AMD 762 host to AGP bridge> port 0xc000-0xc003 mem
0xfc000000-0xfc000fff,0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce4 Ti 4200> mem
0xf0000000-0xf007ffff,0xe8000000-0xefffffff,0xf8000000-0xf8ffffff irq 17 at device 5.0
on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xfb025000-0xfb025fff irq 19 at device 0.0
on pci2
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 17 at device 5.0 on pci2
pcm0: <eMicro EM28028 AC97 Codec>
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x9800-0x983f mem
0xfb000000-0xfb01ffff,0xfb024000-0xfb024fff irq 16 at device 7.0 on pci2
fxp0: Ethernet address 00:0d:61:20:2d:ad
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise PDC20276 UDMA133 controller> port
0xac00-0xac0f,0xa800-0xa803,0xa400-0xa407,0xa000-0xa003,0x9c00-0x9c07 mem
0xfb020000-0xfb023fff irq 18 at device 8.0 on pci2
atapci1: [MPSAFE]
ata2: at 0x9c00 on atapci1
ata2: [MPSAFE]
ata3: at 0xa400 on atapci1
ata3: [MPSAFE]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd27ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc62a6c60
ad0: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata0-master UDMA100
ata1-slave: WARNING - SETFEATURES recovered from missing interrupt
acd0: DVDROM <LITEON DVD-ROM LTD163D> at ata1-master PIO4
acd1: CDRW <SONY CD-RW CRX195E1> at ata1-slave PIO4
GEOM: create disk ad4 dp=0xc639e960
ad4: 76319MB <WDC WD800BB-00DAA3> [155061/16/63] at ata2-master UDMA100
GEOM: create disk ad6 dp=0xc639e760
ad6: 76319MB <WDC WD800BB-00CAA1> [155061/16/63] at ata3-master UDMA100
GEOM: create disk ar0 dp=0xc62a39e0
ar0: 152638MB <ATA RAID0 array> [19458/255/63] status: READY subdisks:
disk0 READY on ad6 at ata3-master
disk1 READY on ad4 at ata2-master
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 13856 files 15
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 11940 files 2
/var: superblock summary recomputed
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
