> From: Michael E. Mercer > The drive that can not be found is a > Western Digital WD Enterprise 4360 > 4.3 GB Wide-Ultra SCSI
> I have removed the second SCSI controller card (PCI) and > the Seagate SCSI Hard Drive. It's been a while--but if you're saying you removed the drive that fbsd sees and you installed on, and the system still boots, then you indeed have a raid array with 2 drives, ie a mirror. Or you _had_ an array. You now have a broken mirror. Please post a new dmesg. Also noticed from your original dmesg: ccd0-3: Concatenated disk drivers which I've never used but makes me suspicious. ;-) iirc compaq 800's have a separate raid configuration utility for managing a hardware array. Check the HP/Compaq site and you may find it for d/l. > All that remains is the On-motherboard scsi controller and the > western digital SCSI drive. And freebsd (looked like it) installed on the Seagate/Compaq drive? > The Compaq Configuration Utility sees the drive. > But FreeBSD does not. Hopefully I'm not missing something obvious, but seems to me you've broken the mirror by removing a drive and will have to rebuild it using compaq's raid utility. See if you can find it. Regards, Riley _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
