On 14 Sep 2003 12:19:03 -0400 Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> Half a minute reading the first, obvious, manual (usb(4)) told me that > you need the uhub device. I don't know if that's all you need (you'll > probably need usbd(8) to attach devices, at a guess), but it's a start. It turns out that FreeBSD cannot assign an IRQ to my USB controller(s): # dmesg | grep uhci uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.0 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 16.1 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 11 at device 16.2 on pci0 uhci1: Could not allocate irq device_probe_and_attach: uhci1 attach returned 6 Under Linux 2.4.22 on the same box, IRQ 10 is shared between my WinTV PVR card and a USB UHCI at I/O 0xe000; and IRQ 11 is shared between my GeForce 2 card, PCI modem, and a USB UHCI at I/O 0xe400 - with no conflicts, as far as I can tell. Is there any way I can coax FreeBSD into letting these devices share IRQs 10 and 11? Richard _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
