Yes I realize about the 10.0... and 192.168.... not being routed matter. Previosly I always setup the network but never run out of IP address in the same range(192.168.0.*). It happened this time. Therefore I created the 192.168.1.* network but now it wont route. I can use NAT for that purpose but that would defeat communication between the 192.168.1.* and 192.168.0.* networks(there are a bunch of ftp and samba file/print servers in the 1.* network).
I mean if I use nat: 192.168.0.* Connect > 192.168.1.* = No success 192.168.0.* < Connect 192.168.1.* = Success > On Tuesday, 30 September 2003 at 21:33:43 -0400, > [EMAIL PROTECTED] wrote: >> Dear FreeBSD users, >> >> I urgenly need to connect 192.168.1.* network to the internet. What >> am I doing wrong? > > You're assuming it's possible. It's not. Addresses in the range > 192.168.x.x are explicitly not routed. See RFC 1918 > (http://www.cis.ohio-state.edu/cgi-bin/rfc/rfc1918.html) for further > details. > > You're not very clear about your router, but I assume it does NAT for > you: to connect an RFC 1918 network to the Internet, you need to use > some form of Network Address Translation (NAT). Theoretically, you'd > need to do the same at the junction between the 192.168.0.x and > 192.168.1.x networks, though you might be able to fake things by > choosing 23 bit net masks. If this doesn't mean anything to you, > don't ask. > > Greg > -- > When replying to this message, please copy the original recipients. > If you don't, I may ignore the reply or reply to the original recipients. > For more information, see http://www.lemis.com/questions.html > See complete headers for address and phone numbers. > NOTE: Due to the currently active Microsoft-based worms, I am limiting > all incoming mail to 131,072 bytes. This is enough for normal mail, > but not for large attachments. Please send these as URLs. > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
