I have added the following entry to /etc/gettytab file test.std.115200:\ :ep:sp#4800:tc:Pc
And also I have changed /etc/ttys file cuau3 "/usr/libexec/getty test.std.115200" cons25 on secure I expect /dev/cuau3 device to use even parity and 4800 as speed, but when I check the device properties using stty -f /dev/cuau3, only speed changes to 4800 and parity value does not change. Here's the output of stty -f /dev/cuau3 after applying the changes using kill -HUP 1 command. speed 4800 baud; lflags: -icanon -isig -iexten -echo iflags: -icrnl -ixon -ixany -imaxbel -brkint oflags: -opost tab3 cflags: cs8 -parenb _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
