Hi,
El día Wednesday, January 02, 2013 a las 08:19:11PM -0800, Joseph Olatt
escribió:
>
> I've been trying to get baresip to work on my FreeBSD 9.x laptop and
> haven't had much success. I register successfully to callcentric.com and
> it appears that I can connect and there is a stream of data coming
> through based on the status display:
>
> [0:00:08] audio=0/0 (bit/s) [ ]
The display shows zero audio data!
> However, there is no sound.
Have you tried the local audio loop with pressing the single letter 'a'?
> Is anybody on the list successfully using baresip? If so, could they
> please provide some pointers on how to get sound?
I'm attaching my config file which works fine; in your config file it
looks stange to me:
> # Audio
> audio_dev /dev/audio0.0
do you have such a device file '/dev/audio0.0'?
> # Audio codec Modules (in order)
> #module g7221.so
> #module g722.so
> module g711.so
> #module gsm.so
> #module l16.so
> #module speex.so
> #module celt.so
> #module bv32.so
>
> # Audio filter Modules (in order)
> # NOTE: AEC should be before Preproc
> #module sndfile.so
> #module speex_aec.so
> #module speex_pp.so
> #module speex_resamp.so
> #module plc.so
>
> # Audio driver Modules
> #module oss.so
> #module alsa.so
> #module portaudio.so
> #module gst.so
you have no audio driver loaded, try 'oss.so'
Once you get the local loop working you could contact me off-list for my
SIP and try to call me.
HIH
matthias
--
Sent from my FreeBSD netbook
Matthias Apitz | - No system with backdoors like Apple/Android
E-mail: [email protected] | - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ | - No proprietary attachments
phone: +49-170-4527211 | - Respect for open standards
#
# baresip configuration
#
#------------------------------------------------------------------------------
# Core
poll_method poll # poll, select, epoll ..
# Input
input_device /dev/event0
input_port 5555
# SIP
sip_trans_bsize 128
#sip_listen 127.0.0.1:5050
# Audio
audio_dev /dev/dsp
audio_srate 8000-48000
audio_channels 1-2
#audio_aec_length 128 # [ms]
# Video
video_dev /dev/video0
video_size 352x288
video_bitrate 384000
video_fps 25
#video_selfview window # {window,pip}
# AVT - Audio/Video Transport
rtp_tos 184
#rtp_ports 10000-20000
rtp_ports 1024-1030
#rtp_bandwidth 512-1024 # [kbit/s]
rtcp_enable yes
rtcp_mux no
jitter_buffer_delay 5-10 # frames
# Network
#dns_server 10.0.0.1:53
#------------------------------------------------------------------------------
# Modules
module_path /usr/local/lib/baresip/modules
# UI Modules
module stdio.so
module cons.so
#module evdev.so
# Audio codec Modules (in order)
#module g7221.so
#module g722.so
module g711.so
#module gsm.so
#module l16.so
#module speex.so
#module celt.so
#module bv32.so
# Audio filter Modules (in order)
# NOTE: AEC should be before Preproc
#module sndfile.so
#module speex_aec.so
#module speex_pp.so
#module speex_resamp.so
#module plc.so
# Audio driver Modules
module oss.so
#module alsa.so
#module portaudio.so
#module gst.so
# Video codec Modules (in order)
module avcodec.so
#module vpx.so
# Video source modules
module v4l2.so
#module avformat.so
#module v4l.so
# Video display modules
module x11.so
# module sdl.so
# Media NAT modules
module stun.so
module turn.so
module ice.so
# Media encoding modules
#module srtp.so
# Other modules
#module natbd.so
#------------------------------------------------------------------------------
# Module parameters
# Speex codec parameters
speex_quality 7 # 0-10
speex_complexity 7 # 0-10
speex_enhancement 0 # 0-1
speex_vbr 0 # Variable Bit Rate 0-1
speex_vad 0 # Voice Activity Detection 0-1
speex_agc_level 8000
# NAT Behavior Discovery
natbd_server creytiv.com
natbd_interval 600 # in seconds
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[email protected]"
