great, thanks for the help!
cc-ing the list just to leave a trace for others in my footsteps...
marko
Quoting Josh Paetzel <[EMAIL PROTECTED]>:
> On Wed, Jun 04, 2003 at 01:09:38AM +0200, Marko Djukic wrote:
> > thanks for the blazing response! :)
> >
> > so i can comment out all the raid controllers in the kernel config?
> >
> > m.
>
> Yes. The only thing you need are the ata drivers, which you need anywys for
> regular controllers.
>
> Josh
>
> [EMAIL PROTECTED] ('tty') /home/jpaetzel -> dmesg |grep ata
> atapci0: <Promise TX2 ATA133 controller> port
> 0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 mem
> 0xdfffc000-0xdfffffff irq 10 at device 15.0 on pci0
> ata2: at 0xe800 on atapci0
> ata3: at 0xe000 on atapci0
> atapci1: <VIA 8233 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on
> pci0
> ata0: at 0x1f0 irq 14 on atapci1
> ata1: at 0x170 irq 15 on atapci1
>
> There's the controllers.
>
> dmesg |grep ar
> ar0: 152638MB <ATA RAID0 array> [19458/255/63] status: READY subdisks:
>
> ANd there's the RAID array.
>
> Josh
>
> >
> > Quoting Josh Paetzel <[EMAIL PROTECTED]>:
> >
> > > On Wed, Jun 04, 2003 at 12:57:50AM +0200, Marko Djukic wrote:
> > > > hi,
> > > >
> > > > anything particular that needs to be set in the kernel config to get
> the
> > > > PDC20276 raid to work?
> > > >
> > > > thanks,
> > > >
> > > > marko
> > >
> > > Nope. The ata driver detects it as ar0 automagically.
> > >
> > > Josh
> > >
> >
>
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
