Hi,
I have about 120 FBSD routers - diskless. I use FBSD 8.2, with no problems. But
now I am trying 9.0, the same configuration
I found difference of behavior command arp between 8.2 and 9.0.
In 8.2 I can see arp of ip on all devices, physical and vlans.
vlan356: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3<RXCSUM,TXCSUM>
inet 10.201.15.65 netmask 0xffffffe0 broadcast 10.201.15.95
%arp 10.201.15.65
? (10.201.15.65) at 00:25:90:50:29:82 on vlan356 permanent [vlan]
On 9.0 i can see arp only on physical interface em0, on vlans no:
vlan319: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=3<RXCSUM,TXCSUM>
inet 10.219.5.193 netmask 0xffffffe0 broadcast 10.219.5.223
%ping 10.219.5.193
PING 10.219.5.193 (10.219.5.193): 56 data bytes
64 bytes from 10.219.5.193: icmp_seq=0 ttl=64 time=0.032 ms
^C
--- 10.219.5.193 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.032/0.032/0.032/0.000 ms
%arp 10.219.5.193
10.219.5.193 (10.219.5.193) -- no entry
Is it bug or feature?
Thanks
Radek
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
