Hi all I have some problems in the second phase of running a device from a nanobsd image. After copying the image on a flash memory, and after I set the system to boot up from flash memory, I just see a black screen and a blinking cursor ! looks like the boot device ( flash memory ) is not recognized by the system. Here are my debugging information , if they are not enough, tell me please to send you necessary informations : dmesg output : da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <UFD 2.0 Silicon-Power8G PMAP> Removable Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 7388MB (15130624 512 byte sectors: 255H 63S/T 941C) according to the last line, I change the NANO_SECTS to 63 and NANO_HEADS to 255. (in nanobsd.sh). ls /dev output : da0s1 da0s1a ad6s1b da0s3 ad6s1d da0s4 according to the first column , I set NANO_DRIVE to da0. (in nanobsd.sh) and here are the contents of the flash memory : ls /mnt .cshrc boot lib rescue usr .profile cfg libexec root var .snap conf media sbin COPYRIGHT dev mnt sys bin etc proc tmp Am I missing something ?? could you please me please ? _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
