Hi,
I've been looking at the performance of my new NAS box - built
using a Jetway JNF99FL-525 with 4GB of 1066 DDR3 and a pair of 2TB Samsung
F4 drives in a mirror. It all works but the performance reports are puzzling
Running bonnie -s 8192 - reports character and block write times of
around 66MB/s which is consistent with what zpool iostat -v and systat -v
are showing me. Read performance OTOH is strange, zpool and systat both
reporting consistently an aggregated read speed of around 120MB/s during
the block read tests (which seems a bit slow for the drives - and indeed
systat reports the drives at less than 50% utilisation) but bonnie is only
reporting 35MB/s, I see similar discrepancies with simple dd block reads
to /dev/null, in which case my stopwatch agrees with dd.
I made some more bonnie tests on the boot SSD - there everything is
as expected systat and bonnie agree and the disc gets pushed to 90-100%
utilisation with write speeds over 100MB/s and read speeds over 250MB/s.
Also a dd of the raw drive (read only of course) runs the drives up
to around 130MB/s easily - dd and systat agree about the speed.
First up can anyone explain the discrepancy between bonnie and
zpool/systat for the XFS pool ? Secondly can anyone suggest a reason that I
can't seem to get the drives above 50% reported utilisation on reads ?
--
Steve O'Hara-Smith | Directable Mirror Arrays
C:>WIN | A better way to focus the sun
The computer obeys and wins. | licences available see
You lose and Bill collects. | http://www.sohara.org/
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
