On Mon, 04 Jun 2012 02:06:57 +0100 Kaya Saman <kayasa...@gmail.com> wrote:
> Hi, > > this is a very strange issue but I guess will either be related to > 2 things, PSU not being powerful enough or disk controller simply > being crap. > > > Here's what's going on. I have a little Chenbro 4 disk mini-ITX NAS > server with 2x 2TB disks and 2x4TB disks as storage - all spread > out over 2 ZFS storage pools. Additionally I am running the root > file system on a 40GB SSD. > > The strange thing with this is that I recently installed the 4TB > disks and they're brand new. > > > One disk connected to the system board works fine and shows up as > online and on one of the channels using atacontrol list. > > > The other disk is connected to a Startech.com Jmicron based 2x SATA > RAID controller card. > > > The disk connected to the controller card is having issues. At > first the drive wouldn't be seen by the system then after a while > all of a sudden it was there. No reboots, no io scans nothing it > just appeared. > > After blasting it with IO for a few days the disk has now vanished > again..... > > I had this error in dmesg for a while: > > ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=113337535 > > I have tried to use pciconf -lbvv to show the connected interfaces > and the JMICRON comes up fine: > > > atapci0@pci0:2:0:0: class=0x010400 card=0x2366197b > chip=0x2366197b rev=0x02 hdr=0x00 > vendor = 'JMicron Technology Corp.' > device = 'JMicron JMB366 AHCI/IDE Controller (JMB36X)' > class = mass storage > subclass = RAID > bar [10] = type I/O Port, range 32, base 0xd040, size 8, > enabled bar [14] = type I/O Port, range 32, base 0xd030, size 4, > enabled bar [18] = type I/O Port, range 32, base 0xd020, size 8, > enabled bar [1c] = type I/O Port, range 32, base 0xd010, size 4, > enabled bar [20] = type I/O Port, range 32, base 0xd000, size 16, > enabled bar [24] = type Memory, range 32, base 0xd0510000, size > 8192, enabled > > > So why isn't the disk? > > I reckon as stated at the beginning that either the 180Watt PSU > inside the system isn't enough or the controller is just really > poor?? > > > Could anyone suggest anything to look into, I'm sure I've covered > all the bases but just incase there is something else I can do with > this one?? Greetings, It looks like you are using the default ATA drive with that. I would suggest trying the AHCI driver and see if that works better. kldload ahci _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
