On 02/05/2012 17:06, Albert Shih wrote:
Le 30/04/2012 ? 17:19:35+0200, Jerome Herman a écrit
I was afraid this would happen. And I fear it is just the begining.
Why you say that ?
Short answer : I am a proud member of the "HAL and DBus are evil" group.
Middle answer : HAL and DBus were made, maintained and tuned with pretty
much nothing but Linux in mind. As a result they hardly play well with
other OS, and will tend to play worse as the time goes by. In fact
general opinion is that HAL never truly worked under Linux either, it is
now officially deprecated.
OK. I'm just a basic user. Event I use FreeBSD since 3.x
I'm sysadmin so I use lot of FreeBSD for the server side. On my laptop I
use...vim/X11/Firefox/ion3 and that is almost everything I knwon.
I remenber when hal is release I lost lot of time to configure X11 to use
my keyboard map (us_intl) and hate hal for that ;-)
ugen5.2:<vendor 0x413c> at usbus5
ums1:<vendor 0x413c Dell Premium USB Optical Mouse, class 0/0, rev 2.00/0.09, addr
2> on usbus5
ums1: 5 buttons and [XYZT] coordinates ID=0
Ok looking at your files, it does not appear to be a hal/dbus problem
either :
The device is correctly probed and registered with DBus, known as
/dev/ums1, and the x11 driver is mapped to "mouse" which should be correct.
For one reason or another, xorg is not catching/processing the info.
Can you send the Xorg log ? Just wait until X is up and then plug the
mouse. I am curious to see what happens inside xorg.
I think the problem is indeed comme from Xorg.
Before I plug (Notice my touchpad working)
http://dl.free.fr/nkZEuk5nZ
I plug the mouse
http://dl.free.fr/vEn4bnirv
Thanks.
Regards.
JAS
Ok here is what happens,
In your system you have your touchpad declared both in a static way in
your xorg config, and probed by HAL.
What happens is that when xorg starts it first install the touchpad as
required by the config file, and then tries to install it again via
autodetection. Of course the second installation of the same device
doesn't work as the device is already busy with xorg, and xorg stops to
try to auto-install devices.
When you plug another mouse, xorg is notified that there are new
devices, but starts by trying to reinstall the touchpad, fails again for
the same reason as above and stops trying.
In order to solve your problem you can try the following :
a) remove the touchpad lines from your xorg config. This way the
touchpad should be installed by auto detection. (simply comment it as
you might be needing it back soon)
b) forbid hal from probing the touchpad. If solution a fails, I would
explain to you how to do this if solution a) fails.
Jerome Herman
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
