On 03/02/12 22:18, sean wrote:
On 03/01/12 19:26, Da Rock wrote:
Which mixer? Check `ls /dev/mixer*`, and use `mixer -f
/dev/mixer<whatever numbers show up in previous cmd`.
I did not realize there was more than one mixer.
Anyway, here are my results to the commands above.
tardis# ls /dev/mixer*
/dev/mixer0 /dev/mixer1
tardis# mixer
Mixer vol is currently set to 91:91
Mixer pcm is currently set to 97:97
Mixer line is currently set to 75:75
Mixer mic is currently set to 97:97
Mixer cd is currently set to 91:91
Mixer rec is currently set to 100:100
Mixer igain is currently set to 0:0
Mixer ogain is currently set to 50:50
Mixer line1 is currently set to 75:75
Mixer phin is currently set to 0:0
Mixer phout is currently set to 0:0
Recording source: mic
tardis# mixer1
mixer1: Command not found.
tardis# mixer -f /dev/mixer
Mixer vol is currently set to 91:91
Mixer pcm is currently set to 97:97
Mixer line is currently set to 75:75
Mixer mic is currently set to 97:97
Mixer cd is currently set to 91:91
Mixer rec is currently set to 100:100
Mixer igain is currently set to 0:0
Mixer ogain is currently set to 50:50
Mixer line1 is currently set to 75:75
Mixer phin is currently set to 0:0
Mixer phout is currently set to 0:0
Recording source: mic
Somehow I think you've misunderstood what I said. Just post the output
of `mixer -f /dev/mixer1`. I think you will find your answer there.
The default mixer (/dev/mixer0) is your soundcard, and this will be the
basis of `mixer` and `mixer -f /dev/mixer`; the other will probably be
the webcam audio ports- to verify this, it will only show recording
tunables.
You can adjust the levels similarly, and you should be able to get a
result from that.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
