On 11/20/11, Rob Clark <rpcl...@tds.net> wrote: > Running fbsd 8.2R on a Dell C640 laptop. > Using a pcmcia card with atheros. > > My 2wire wireless router comes setup default with > wep open with wireless security enabled, i.e., needs > the default passkey from the router. I cannot get the > ifconfig line correct so as to authenticate this way, > and have tried many different strings of text here. > > However, following the handbook, I turned off "enable > security" (on the 2wire router) to test things, hence, > using wep (not as authmode shared or authmode open) > and it works using the following in /etc/rc.conf: > > wlans_ath0="wlan0" > ifconfig_wlan0="ssid Mynetname DHCP" > > Mynetname is different -- of course. > > I can browse the web and ping with 0% packet loss. > > I have not delved into using > a /etc/wpa_supplicant.conf yet, I was > hoping i could get it done in rc.conf with ifconfig. > > I have tried many many things, for days on end for > authenticating with the passkey from the router. > Any help appreciated, I can provide further info and > things I've tried -- most things in the handbook > wireless section, minus wpa_supplicant.conf.
Should adding "nwkey key" to ifconfig_wlan0 line above be enough? Key may be in ascii or in hex (in which case it must start with 0x). As you should probably already know wep provides 0% security so having wep or open network gives you almost exactly same amount of security. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
