Hi, I am trying to use the Belkin Surf & Share Wireless USB Adapter on FreeBSD 8-Stable (csup-ed on 18.Oct), but it doesnt work. This is based on the realtek 8192 chip. After installing the new kernel and world, I then used ndisgen to generate the ko.
I am able to get wlan0 "UP" after I manually load the generated kernel
module rtl8192su_sys.ko
ndis0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect mode 11b
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 94:44:52:61:e0:dc
media: IEEE 802.11 Wireless Ethernet autoselect
ssid "" channel 1 (2412 MHz 11b)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
roaming MANUAL bintval 0
However, both "ifconfig wlan0 scan" and "ifconfig wlan0 list scan" yield
nothing.
# usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen4.2: <product 0x845a vendor 0x050d> at usbus4, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON
ugen1.2: <OM vendor 0x04f3> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON
ugen0.2: <USB AUDIO vendor 0x1130> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
Relevant logs are:
Oct 19 14:32:20 linbox kernel: ndis0: <vendor 0x050d product 0x845a, class
0/0, rev 2.00/2.00, addr 2> on usbus4
Oct 19 14:32:20 linbox kernel: ndis0: NDIS API version: 5.1
Oct 19 14:32:20 linbox kernel: ndis0: usbd_pnp: unsupported I/O dispatch
27:8
Oct 19 14:32:20 linbox root: Unknown USB device: vendor 0x050d product
0x845a bus uhub4
Oct 19 14:32:20 linbox root: Unknown USB device: vendor 0x050d product
0x845a bus uhub4
Oct 19 14:32:22 linbox kernel: wlan0: Ethernet address: 94:44:52:61:e0:dc
I am attaching the relevant /var/log/messages and the typescript. Anything
to be set in sysctl ?
Any pointers on how to debug this further -- I would really like to get this
to work on FreeBSD ?
Thanks
Gautam
messages
Description: Binary data
typescript
Description: Binary data
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
